This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos SG210 HA Configuration

Hi,

I'm running two SG210 in my company in Active/Passive mode.

We are going to set up a disaster site, and as a part of our plan, I want to know how we can manage to setup the same Sophos HA in disaster site.

Is it possible to extend our cluster from 2 to 4 devices? or there is any other solution?

All our physical and virtual servers, storage devices, network switches, etc. are in HA mode with disaster site, but the sophos cluster.

Our goal is that everything be as automatic as possible.

Regards.



This thread was automatically locked due to age.
Parents
  • Hallo,

    As Alex implies, it's unlikely you can do this.  The only way I've heard of it being done was with the single, passive unit in the DR site where all of the subnets connected to the node were identical to those at the primary site.  I don't like that solution because it causes problems with Up2Dates and can lead to unnecessary downtime at the primary site.  I always recommend a new Active/Passive pair at the DR site.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hallo,

    As Alex implies, it's unlikely you can do this.  The only way I've heard of it being done was with the single, passive unit in the DR site where all of the subnets connected to the node were identical to those at the primary site.  I don't like that solution because it causes problems with Up2Dates and can lead to unnecessary downtime at the primary site.  I always recommend a new Active/Passive pair at the DR site.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data