Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 5 subscribers
  • Views 1437 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Active/passive with SG 310 Rev. 1 and XG 310 Rev. 1

terrzfor

We currently have a single SG 310 in use. As we're moving towards more network segmentation, this becomes a potential single point of failure.

Thus, we want to upgrade to an active/passive pair, which - as far as I know - requires identical hardware for the second device. Sadly, our SG 310 is Revision 1 which is not available anymore.

We could probably obtain an XG 310 Rev. 1. Would that hardware be 100% compatible to an SG 310 Rev. 1?



This thread was automatically locked due to age.
Parents
  • FormerMember
    +1 FormerMember

    Hi  

    Thank you for reaching out to the Community!

    XG 310 Rev 1 might not work in HA with SG 310 Rev 1, as both are different hardware models.

    Hardware model and revision number should be identical to avoid any conflicts while syncing between the two devices.

    Thanks,

Reply
  • FormerMember
    +1 FormerMember

    Hi  

    Thank you for reaching out to the Community!

    XG 310 Rev 1 might not work in HA with SG 310 Rev 1, as both are different hardware models.

    Hardware model and revision number should be identical to avoid any conflicts while syncing between the two devices.

    Thanks,

Children
Unfiltered HTML