This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG 425 Display with homelicense

Hello,


I'm using the ASG 425 Rev3 (Core2Duo E6400) Hardware Appliance in a private Network.

I got the Home-License running achieved through deleting the ASG File in /etc Folder.

Since i did that, the display isnt working anymore.

Is there any solution for that problem?

Kindly regards



This thread was automatically locked due to age.
Parents
  • Hi, just tested it out, and it works, but it does not cycle the display, through the interface/ram/cpu values, it just stands on one page with the utm version and uptime.

    I found out that /etc/lcd.data is not being generated on software installs, so you have to create /etc/asg again and remove the id and serial number, then everything works like on a hardware appliance :-)

    Read here on bottom where it says : Updated: 15/11-2016:

    http://martinsblog.dk/sophos-utm-use-hardware-appliances-with-home-software-license/

    ----

    Best regards Martin ;-)

    Sophos UTM Certified Engineer 9.5
    Sophos  XG  Certified Engineer 17.1
    Homelab: 1 x SG210 XG v18 - 3xAPX530 - 1 x SG210 v9.7 - 1 x UTM 220 v9.7 - 1 x SG135 v9.7 (All Fullguard Plus licenses)

Reply
  • Hi, just tested it out, and it works, but it does not cycle the display, through the interface/ram/cpu values, it just stands on one page with the utm version and uptime.

    I found out that /etc/lcd.data is not being generated on software installs, so you have to create /etc/asg again and remove the id and serial number, then everything works like on a hardware appliance :-)

    Read here on bottom where it says : Updated: 15/11-2016:

    http://martinsblog.dk/sophos-utm-use-hardware-appliances-with-home-software-license/

    ----

    Best regards Martin ;-)

    Sophos UTM Certified Engineer 9.5
    Sophos  XG  Certified Engineer 17.1
    Homelab: 1 x SG210 XG v18 - 3xAPX530 - 1 x SG210 v9.7 - 1 x UTM 220 v9.7 - 1 x SG135 v9.7 (All Fullguard Plus licenses)

Children
No Data