This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Portfreigabe sophos RED 60

hallo,

ich habe ein sophos utm mit der IP 192.168.1.1 und habed eine Red 60 mit der ip 192.168.20.1

ich möchte portfreigabe machen von 192.168.1.1 firewall zu red 192.168.20.1 da ist einsynlogy mit port 5001 ip 192.168.20.200 wie kann ich es machen.



This thread was automatically locked due to age.
Parents
  • Hello Jan,

    Good day and thanks for reaching out to Sophos Community

    As I understand it, you want to create a DNAT/port forward to 192.168.1.x network going to Synology server on the 192.168.200.20 IP? 

    If possible could you share a diagram and traffic flow for this?

    On the other hand, could you try to create a Firewall rule for 192.168.1.x -> 192.168.200.20 allowing the said ports for Synology.\

    Many thanks for your time and patience and thank you for choosing Sophos

    Cheers,

    Raphael Alganes
    Community Support Engineer | Sophos Technical Support
    Sophos Support Videos Product Documentation  |  @SophosSupport  | Sign up for SMS Alerts
    If a post solves your question use the 'Verify Answer' link.

Reply
  • Hello Jan,

    Good day and thanks for reaching out to Sophos Community

    As I understand it, you want to create a DNAT/port forward to 192.168.1.x network going to Synology server on the 192.168.200.20 IP? 

    If possible could you share a diagram and traffic flow for this?

    On the other hand, could you try to create a Firewall rule for 192.168.1.x -> 192.168.200.20 allowing the said ports for Synology.\

    Many thanks for your time and patience and thank you for choosing Sophos

    Cheers,

    Raphael Alganes
    Community Support Engineer | Sophos Technical Support
    Sophos Support Videos Product Documentation  |  @SophosSupport  | Sign up for SMS Alerts
    If a post solves your question use the 'Verify Answer' link.

Children
No Data