This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

2 Internetverbindungen priorisieren

Hallo Community,

Zum Einsatz ist eine ist derzeit eine Sophos SG230. Am Hauptstandort gibt es 2 Leitungen. Einmal Company Connect (10 MBit Standleitung synchron) und einmal VDSL 50 Mbit ganz normale Leitung mit einem Upload von 10 Mbit.

Die Standleitung soll Hauptsächlich für die Außenstandorte und die VPN Verbindungen genutzt werden.

Am Hauptstandort soll Hauptsächlich das VDSL genutzt werden. Hier ist die Frage wie ich das Einstelle?

Unter Schnittstellen & Routing -> Uplink - Ausgleich habe ich die VDSL Verbindung schon an erster Stelle. Wenn ich nun am Hauptstandort an einen Rechner gehe, dann habe diese kaum Internet. Ich denke das hier die Company Connect Leitung genommen wird. Ich bin echt Ratlos.

Viele Grüße

This thread was automatically locked due to age.

Parents

0 Raphael Alganes over 1 year ago

Hello,

Thanks for reaching out to Sophos Community

In Uplink Balancing you need to determine and set weight for your 2 WAN Links, example config is set the primary link to 100 and then set the other at 50 (half of the traffic will go through the second link) - you can set and configure this depending on your designated link speeds.

Note also that default in Uplink balancing is persistence by connection - If you want specific traffic to prefer an interface, you can opt to use a Multipath rule - https://support.sophos.com/support/s/article/KB-000034635?language=en_US

Hope this helps. Have a nice day and thank you for choosing Sophos

Cheers,

Raphael Alganes
Community Support Engineer | Sophos Technical Support
Sophos Support Videos | Product Documentation | @SophosSupport | Sign up for SMS Alerts
If a post solves your question use the 'Verify Answer' link.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Raphael Alganes over 1 year ago

Hello,

Thanks for reaching out to Sophos Community

In Uplink Balancing you need to determine and set weight for your 2 WAN Links, example config is set the primary link to 100 and then set the other at 50 (half of the traffic will go through the second link) - you can set and configure this depending on your designated link speeds.

Note also that default in Uplink balancing is persistence by connection - If you want specific traffic to prefer an interface, you can opt to use a Multipath rule - https://support.sophos.com/support/s/article/KB-000034635?language=en_US

Hope this helps. Have a nice day and thank you for choosing Sophos

Cheers,

Raphael Alganes
Community Support Engineer | Sophos Technical Support
Sophos Support Videos | Product Documentation | @SophosSupport | Sign up for SMS Alerts
If a post solves your question use the 'Verify Answer' link.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data