This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM and AP55 mesh - how to extent

Hi all,

we have an installation with 6 AP55 on a UTM 135w (all meshed because there is no cable infrastructure).

Now one AP55 is broken and we also want to extent. But how? There is no chance to mix AP and APXs (mesh mismatch).

What is my option? Get an old AP55 somewhere from? Replace all AP55 with APX models? Situation is very bad!

Thanks for help

Gernot



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hi ,

    Thanks for reaching out to the Community! 

    I'd suggest you reach out to the local Sophos Sales team or your account manager to discuss the possible options as the cross-platform mesh between an AP and APX series isn’t supported, so you won't be able to create a mesh network with AP and APX series hardware. 

    Thanks,

Reply
  • FormerMember
    0 FormerMember

    Hi ,

    Thanks for reaching out to the Community! 

    I'd suggest you reach out to the local Sophos Sales team or your account manager to discuss the possible options as the cross-platform mesh between an AP and APX series isn’t supported, so you won't be able to create a mesh network with AP and APX series hardware. 

    Thanks,

Children
No Data