This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Welche WAN ist aktiv

Hallo,

ich habe eine DSL Leitung und als Backup eine LTE.

Über Uplink Balancing ist DSL oben und LTE weiter unten. 

Timeout steht auf 1min.

Wo kann ich prüfen, welchen Weg der Traffic aktuell nimmt?

Gruß, Herry



This thread was automatically locked due to age.
  • FormerMember
    0 FormerMember

    Hi ,

    Thank you for reaching out to Sophos Community.

    You can monitor the interface traffic from the dashboard.

    You can also run the below command in shell to see Rx & Tx packets.

    utm:/root # iftop -i <Interface>

    eg: utm:/root # iftop -i eth1

  • Thanks, but in my monitor it look traffic goes over LTE and not over DSL. DSL was yesterday down, but 1h later always on.

    When switch the UTm from LTE to DSL?

  • Hallo Herry,

    ausser der Positionierung (oben/unten) gibt es noch die Gewichtung, mit welcher welcher Anschluss genutzt werden soll.

    Das verbirgt sich hinter dem kleinen Schraubenschlüssel.

    Mit der Standardgewichtung 100 / 100 wird die Traffic 1:1 auf die Anschlüsse verteilt.

    Ich wähle 100:0 wenn ich einen bestimmten Anschluss möchte.

    Ansonsten gibt "">https://wieistmeineip.de" Auskunft, über welchen Anschluss die jeweilige Verbindung gerade läuft.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • Die Gewichtung ist so eingestellt.

    Muss das ggf. genau anders herum sein?

    Ich vermute jetzt mal ja. Ich dachte immer niedrigste Prio

  • Das stellt wohl eher eine Prozentangabe dar.

    Also der "grössere Wert" bekommt mehr. ... Somit: Ja, genau umgedreht, wenn DSL bevorzugt werden soll.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.