Hallo zusammen,
das Thema habe ich zwar schon öfters hier gelesen, aber weitergeholfen hat es mir nicht. Wir haben massive Probleme mit dem Modell SG115W.
SSID's die über Separate Zone ausgestrahlt werden, funktionieren soweit. Das Bridge to AP LAN Wifi funktioniert nicht. Die SSID ist sichtbar, Clients können sich aber nicht verbinden:
hostapd: id="4105" severity="info" sys="System" sub="WiFi" name="STA WPA failure" ssid="WifiXY" ssid_id="WLAN0" bssid="00:1a:8c:0a:a6:00" sta="58:96:1d:75:7a:47" reason_code="2"hostapd: wifi0: STA 58:96:1d:75:7a:47 WPA: event 3 notificationhostapd: wifi0: STA 58:96:1d:75:7a:47 IEEE 802.1X: unauthorizing porthostapd: wifi0: STA 58:96:1d:75:7a:47 MLME: MLME-DEAUTHENTICATE.indication(58:96:1d:75:7a:47, 2)hostapd: wifi0: STA 58:96:1d:75:7a:47 MLME: MLME-DELETEKEYS.request(58:96:1d:75:7a:47)hostapd: wifi0: STA 58:96:1d:75:7a:47 WPA: event 3 notificationhostapd: wifi0: STA 58:96:1d:75:7a:47 IEEE 802.1X: unauthorizing porthostapd: wifi0: STA 58:96:1d:75:7a:47 IEEE 802.11: deauthenticatedhostapd: wifi0: STA 58:96:1d:75:7a:47 MLME: MLME-DEAUTHENTICATE.indication(58:96:1d:75:7a:47, 1)hostapd: wifi0: STA 58:96:1d:75:7a:47 MLME: MLME-DELETEKEYS.request(58:96:1d:75:7a:47)
Passwort ist richtig, daher ist die Fehlermeldung STA WPA failure unlogisch. Was bedeutet reason_code="2" ?
Was mich wundert ist die Meldung IEEE 802.1X: unauthorizing port
Hallo Alphavil8200,
das Prolem ist mir, und sollte auch dem Support, bekannt sein.
Deaktiviere temporär die Verschlüsselung und du wirst sehen dein WLAN funktioniert.
Ist zwar keine Lösung des…
Hi Alphavil8200,
Thanks for reaching out to the Community!
Please open a support case at support.sophos.com with wireless logs for in-depth investigation and provide me the case number via PM.
Thanks,
Community Support Engineer | Sophos Technical SupportSupport Videos | Product Documentation | @SophosSupport | Sign up for SMS Alerts If a post solves your question use the 'Verify Answer' button.
Hallo,
(Sorry, my German-speaking brain isn't creating thoughts at the moment. )
Your earlier posts were in the XG Community, should one of us move this thread there?
IN UTM, the answer is that you must manually create a bridged interface from your LAN and add the bridged-to-AP-LAN wireless NIC to your bridge. I don't know if the same is necessary with XG.
MfG - Bob (Bitte auf Deutsch weiterhin.)
Ist zwar keine Lösung des Problems, zeigt aber, dass es nicht an dir sondern am Produkt liegt.
Gruß Swen
konntest du das Problem eingrenzen?
Gruß
SB
Hi SwenBross,
Did you open a support case for this issue? If yes, please send me your support case number via PM.
Hi BAlfson,
sorry it is a UTM, no XG.
"IN UTM, the answer is that you must manually create a bridged interface from your LAN and add the bridged-to-AP-LAN wireless NIC to your bridge. I don't know if the same is necessary with XG."
Really? I thought that this workaround was only the right way in the past ?
wir haben dem Kunden einen AP15 zur Verfügung gestellt das dieser wieder arbeiten kann. Das funktioniert bisher gut. Wir werden keine W-Geräte mehr anbieten, das Thema scheint ja schon Jahre ein Problem zu sein