This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos 220 XG Version Display

Hallo zusammen,

 

Ich habe mir vor mehr als 3 Jahren eine Sophos UTM 220 gekauft und dort die Software Version von Sophos XG Installiert. Läuft auch echt prima. Was ich jedoch ärgerlich finde ist, dass das Display jetzt nur leuchtet und nicht mehr nutzbar ist. Ich habe schon viel im Internet gesucht aber konntet nichts dazu finden. Deswegen wollte ich euch fragen, ob jemand eine Idee hat, wie ich das Display mit einem Trick wieder in Betrieb nehmen kann und kann mir dabei helfen?. Natürlich OHNE wieder auf die UTM Version zu wechseln. Ich möchte das Display mit der XG Version nutzen.

 

Gruß

Flo



This thread was automatically locked due to age.
  • Hallo Flo,

    ich hatte dasselbe Problem bei uns mit einer UTM 220.

    Wir nutzen die UTM220 für unsere Azubi Umgebung für Tests (Home Use / EVALUATION License).

    Wir hatten da ein anderes Hardware-Image aufgespielt und seitdem funktioniert bei uns das Display leider auch nicht mehr.

    Haben zwar auch damals nahc Lösungen geschaut, aber nichts gefunden... Evtl. weiß ja noch jemand mehr hier :)

     

     

    Gruß Bepo

     

  • Hallo Flo,

    um das Display zu nutzen musst Du das ISO für UTM v9 Hardware Appliance nutzen. Das ISO für UTM v9 Software Appliance unterstützt das Display nicht.
    Sofern Du XG nutzt, wäre dies das falsche Forum.
    Der Wermutstropfen ist, dass eine Home Lizenz nur mit der Software Version läuft.

    Beste Grüße 

    Alex 

    -

  • Also bei der UTM funktioniert das sehrwohl auch mit der Software ISO:

    SOPHOS HW Appliance LCD Activation

     

    1. Enter shell mode

     

    1. Type vi /etc/asg

     

    1. Insert the following text (marked blue):

    Example for SG 210

    ASG_VERSION=”210″
    LCD4LINUX_HW=”LCD-SERIAL300″
    ASG_SUBTYPE=”r1″

    Example for UTM 220

    ASG_VERSION=”220″
    LCD4LINUX_HW=”LCM-162″
    ASG_SUBTYPE=”r5″

    1. Save the created file pressing ESC then type :wq to save and quit

     

    1. Reboot the device

     

    Eventuell gibt es bei der XG ähnliche Einträge; könnte ich mir durchaus vorstellen... hier müsstet ihr evtl selbst mal einen Blick in die File/s werfen. :)

     

    LG

  • (Sorry, my German-speaking brain isn't creating thoughts at the moment.  )

    He said he's running XG, nd - does this prescription also work for the XG?

    MfG - Bob (Bitte auf Deutsch weiterhin.)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA