I had an issue with my VMWare host, which required me to reset it. I had to recreate all the interfaces. Every other server seems to work just fine, except for the Sophos UTM VM. I was not able to connect to ping the LAN interface, let along connect…

I am using my Sophos XG135 as a DHCP server and configured in gateway mode, Running firmware version SFOS 18.5.2 MR-2-Build380. Internet connection is only active for a period of a bout 20 minutes and then it is lost but the WAN interface shows it is…

Hi, i have 2 WAN connections and a SIP-telephony connection. I am able to direct the SIP connection to a specific interface and the resulting RTP streams are working great. If the ISP1 fails, all connections work with the other ISP2 ... great ... BUT…

Hello community, I have at my disposal a 4G Ethernet Modem and i would like to add a secondary WAN interface with it. Thing is, its public IP is not static and changes constantly. How can i set this up on my UTM (SG230)? Kind Regards

Hi all, I have an UTM 9.705-3 running in a KVM VM. My ISP line is a FTTO 100Mbits. The server runs a second VM - Ubuntu 20.04 - from where I make the tests. Problem is that I get a correct download from the Ubuntu machine, but not the upload. I use…

Hi all, I'd appreciate some help on this matter, basically we have purchased an extra range of IP addresses from our ISP which we want to apply to different webservers. Now the way I thought this was done on the UTM and the way that others have detailed…

Hi All, I have had a security scan performed on the outside of our utm and one of the results displays the following message: Synopsis The remote web server uses an old version of SSL. Description The remote service accepts connections…

I have just upgraded my internet to the TPG Fibre 400mbit service. However i can only get a maximum output on speedtest.net of 260mbit via my SG210. The Firewall is fully patched and uptodate. The service works as it have been tested directly…

We have multiple manufacturing sites within the US, each site has its own T1 for private WAN and its own internet connection as a backup to the T1. Despite pulling as much traffic out of the private WAN as possible, we have grown out of the T1's (shocker…

For years, whenever I had a cable modem issue, and I called for tech support, I'd quietly chuckle when they would ask me to unplug the power to my router. However, a few weeks ago, that was what it took for my Internet to come back (Not literally removing…

Good Morning Everybody, I need your help... I have 2 difference Internet Connections. One from A1 (slowly....) and a twice (faster,backup) LTE Connection. The UTM is configured with Upload Balancing beetween this two Uplinks. I also have a…

Hello, I work for an ISP. We have a customer that is trying to use the Sophos UTM9 SG105 on our Network. They want to set this up between their current cable connection and the fiber connection from us. They uplink to us via a Mikrotik CloudSwitch…

Hi Sorry for the novel, but I wanted to give details. What is the best way to enable multiple ISP uplinks but without the uplink balancing or having to configure multipath rules? I have 2 WAN connections, but obviously when you set a default gateway…

Firstly my UTM is up to date. Whether that is a good or a bad thing is uncertain :) I have a cable modem in bridge mode with three connections to it. Each connection gets a public IP address from my ISP. One of these is the WAN connection on the UTM…

I have my cable modem in bridge mode passing the public IP(s) through to the UTM to avoid double NAT. The issue is that I do not have a fixed public IP and the ISP forces a new IP every 24 hours. So I wake up in the morning and the WAN say UP - ERROR…