This site doesn't allow deletions of posts so I'm putting this here.

Hi All, Why is it that when I download the network usage under Logging & Reporting, choosing the Top clients (default), even on Top servers , the warning always said " Unauthorized access"? But when I tried a different option, I could download the…

I have two UTM 9 on different locations (A, B) of our company. I want to access to machines on the locations B with UNC Path. The reason is that I have a application Server on the location B and I want to have access with UNC path \\appserver\text to…

Not sure at what point this started happening, but users reported slow down with remote desktop sessions when a large burst of traffic from other vlans is being forwarded on other networks. The problem interface is Eth0 where we have vlans feeding into…

I am using my Sophos XG135 as a DHCP server and configured in gateway mode, Running firmware version SFOS 18.5.2 MR-2-Build380. Internet connection is only active for a period of a bout 20 minutes and then it is lost but the WAN interface shows it is…

I have received a old network management card which I wish to use in my UPS to enable me to access it remotely. My problem is I do not know the configured IP address of the second card which had been used in another system and I suspect is configured…

Hi, We have 2 sophos UTM SG115 (box A and box B) which are connected by a VPN link on 2 different locations. Both SOPHOS are of the same revision, 3 and has the latest firmware updates (9.706-9). A box is behind a 200 Mb symetric optical fiber acces…

In under a 24 period I have a logfile that fills up with this message: 2021:02:18-09:51:17 ast-thr-utm-001 httpproxy[16699]: id="0001" severity="info" sys="SecureWeb" sub="http" name="http access" action="pass" method="CONNECT" srcip="172.17.17.2…

Hi all, I have an UTM 9.705-3 running in a KVM VM. My ISP line is a FTTO 100Mbits. The server runs a second VM - Ubuntu 20.04 - from where I make the tests. Problem is that I get a correct download from the Ubuntu machine, but not the upload. I use…

Hi Everyone, I would like to ask for your help regarding google meet. When we are inside our private network we can call someone outside our private network using google meet, audio is fine and we are able to see the video of the person on the other side…

Hi, I have 2 internet connections, 1 is business, 1 is home. Both are plugged into the UTM on different interfaces. I have 2 internal networks, 10.0.0.x and 10.150.0.x. - The 10.150.0.x uses the business connection (static IP) for servers, etc. The…

Hi Can you setup a multipath rule by application somehow? Similar to what you can do with QoS on a interface. I want youtube and other streaming sites for music to send traffic over the 2nd internet connection. So far I have tried some DNS groups…

Hi All, Having two different channels (2 contracts and 2 routers) for line data services, would it be possible to interface the two routers on the UTM (i.e. eth1,eth2) , and manage two independent Wi-Fi lines ? At the moment I’ve configurated the first…

Hey gusy, I´m trying to setup new subnet 172.16.1.0/24 on used interface - eth1. Is it somehow possible to set 2 different IP ranges 19.168.100.0/24 and 172.16.1.0/24 on same interface without VLAN? Thanks for any help! Regards Jiri

Hi Sorry for the novel, but I wanted to give details. What is the best way to enable multiple ISP uplinks but without the uplink balancing or having to configure multipath rules? I have 2 WAN connections, but obviously when you set a default gateway…

Trying to configure ShoreTel Sky with a Cisco 7961 IP Phone to work through UTM 9. According to ShoreTel I need to open everything listed below... I have no problem in doing so as the phones will be configured on its own eth port. TCP 12000 SCCP…

I have been struggling with my SG430's fiber connection to my ISP where we have purchased 1GBps throughput on a dedicated 10GBps port, with bandwidth policers. The SG is connected directly to a Cisco switch not 100 feet below me. I am using an Intel E10G…

Hi All, I've had my UTM running for a while now, however I've only just started to notice that my download speed has slowed significantly when I use my UTM. My UTM is installed on an old Toshiba Satellite Laptop that has a dual core celeron processor…

Hi... So I have a Sophos SG UTM (9.4) that I cannot access the management interface from the WAN side of the network. I've enabled the public IP for my remote network to have access in the Allowed Networks list. When I try to connect it times out…

Hi all, i have configured two interfaces, LAN and WAN. From the WAN Interface, i can ping (under Support-Tools) any internet host. But, as i use the LAN ip Adress as Gateway for my home LAN, i have no traffic at all. I allowed ICMP on all interfaces…