This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Allow Dialup VPN

Hi

 

We have a Sophos SG210 running UTM 9.4, fairly new to it but liking it very much!  I've managed to unblock lots of outbound traffic using the firewall/live logs but have come across something I am unsure how to fix.

 

Sometimes our employees need to access a client system which they do via a SonicWALL VPN client, they connect from a Server 2008R2 RDS instance.  Since implementing the UTM it has been blocked.  Normally I open up the firewall Live Log, filter by IP address (of the RDS server in this instance) and wait to see what traffic is being dropped.  However when I dial the VPN nothing happens in the Live Log.

 

Is there anywhere else in the UTM that could be blocking such traffic?  I have changed the gateway of the RDS server back to our old firewall and the VPN client works fine so I am confident the UTM is blocking the traffic rather than something else on our network or a problem with the client's system.

 

Many thanks

Paul



This thread was automatically locked due to age.