This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VLAN design for home network

I'm thinking of switching to a 3-VLAN setup at home, from the current 3-LAN setup I have.

The VLAN switch would probably be the 8-port gigE NETGEAR GS108T switch.

I want to segregate my trusted LAN, DMZ, and less trusted LAN / WiFi systems.

I've attached a Visio diagram...
I've never setup a VLAN before so I'm curious if this would all work.

Currently thinking of getting a Jetway J7F4 series motherboard for the firewall, but there are reservations about the gigE NICs onboard (RealteK RTL8110SC based).

Any advice is appreciated.

Thanks,
Barry

This thread was automatically locked due to age.

Parents

0 Mike H over 16 years ago

It should work fine, VLANs are essentially administratively defined LANs so you can configure them any which way you desire using either port based or 802.1Q.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Mike H over 16 years ago

It should work fine, VLANs are essentially administratively defined LANs so you can configure them any which way you desire using either port based or 802.1Q.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data