Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 6 subscribers
  • Views 1173 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HA nodes with Flexi Port Module using copper on node 1 and fibre on node 2 - supported?

LHerzog

Currently our SG430 HA A/P cluster with 4 Port 1G Flexi SFP+ Module is using copper on both nodes.

All is fine.

Now one node needs to move to a different location and thus needs it changed from 1G copper to 1G fibre connection while the other keeps it's 1G copper.

We're talking about of the same eth ports of course.

From my opinion it should work with HA but maybe someone already has this up and running and can confirm it?



This thread was automatically locked due to age.
Parents
  • 0

    It works for me in multiple installations.
    But every switch or media converter in the data path is a potential source of problems (more than one time until now)


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0

    It works for me in multiple installations.
    But every switch or media converter in the data path is a potential source of problems (more than one time until now)


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
No Data
Unfiltered HTML