This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL SITE TO SITE VPN SECONDARY SITE

Hi, Question about secondary sites (UTM-9.7)
as attached in the diagram
There is a main site with a Cisco Call manger and on-site ip phones.
There are also 2 sites ip phones.
Each of them is connected in a site to site SSL VPN to a main site. Telephones can be used between the main site and the remote site (A & B), and site A to B works only ringing, no audio.
What is missing in the settings?
Thanks in advance to those who answer

This thread was automatically locked due to age.

Parents

0 PhilippRusch 6 months ago

Shalom,

the routig table on Site A has to include Site B and on Site B you have to include Site A vice versa. Of course you need firewall rules to allow traffic from Site A to Site B directly as well. (And vice versa)

Mit freundlichem Gruß, best regards from Germany,

Philipp Rusch

New Vision GmbH, Germany
Sophos Silver-Partner

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Shalom Friedman 6 months ago in reply to PhilippRusch

Hi Philipp
Thanks for your answer
Under "Static Routing" section?
Cancel
Vote Up 0 Vote Down

Cancel
0 PhilippRusch 6 months ago in reply to Shalom Friedman

Yes.

Mit freundlichem Gruß, best regards from Germany,

Philipp Rusch

New Vision GmbH, Germany
Sophos Silver-Partner

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Shalom Friedman 6 months ago in reply to PhilippRusch
Cancel
Vote Up 0 Vote Down

Cancel
0 PhilippRusch 6 months ago in reply to Shalom Friedman

Your diagram looks ok.

Mit freundlichem Gruß, best regards from Germany,

Philipp Rusch

New Vision GmbH, Germany
Sophos Silver-Partner

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Shalom Friedman 6 months ago in reply to PhilippRusch

Vielen Dank, ich werde später nachsehen
Cancel
Vote Up 0 Vote Down

Cancel
0 Shalom Friedman 6 months ago in reply to PhilippRusch

Still not working, no ping and no audio
Cancel
Vote Up 0 Vote Down

Cancel
0 Vivek Jagad 6 months ago in reply to Shalom Friedman

Hi Shalom Friedman you can take an inspiration of config from the hub and spoke concept IPsec VPN.

Thanks & Regards,
_______________________________________________________________

Vivek Jagad | Team Lead, Technical Support, Global Customer Experience

Log a Support Case | Sophos Service Guide
Best Practices – Support Case | Security Advisories
Compare Sophos next-gen Firewall | Fortune Favors the prepared
Sophos Community | Product Documentation | Sophos Techvids | SMS
If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Shalom Friedman 6 months ago in reply to Vivek Jagad

Hi Vivek . This config for NG Sophos FW. I use UTM 9.7 ver. (SSL)

Thanks anyway.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Shalom Friedman 6 months ago in reply to Vivek Jagad

Hi Vivek . This config for NG Sophos FW. I use UTM 9.7 ver. (SSL)

Thanks anyway.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Vivek Jagad 6 months ago in reply to Shalom Friedman

Yup I gave it to use as a reference point to configure...

Thanks & Regards,
_______________________________________________________________

Vivek Jagad | Team Lead, Technical Support, Global Customer Experience

Log a Support Case | Sophos Service Guide
Best Practices – Support Case | Security Advisories
Compare Sophos next-gen Firewall | Fortune Favors the prepared
Sophos Community | Product Documentation | Sophos Techvids | SMS
If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel