Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 10 replies
  • Answers 1 answer
  • Subscribers 7 subscribers
  • Views 2583 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL SITE TO SITE VPN SECONDARY SITE

Shalom Friedman

Hi, Question about secondary sites (UTM-9.7)
as attached in the diagram
There is a main site with a Cisco Call manger and on-site ip phones.
There are also 2 sites ip phones.
Each of them is connected in a site to site SSL VPN to a main site. Telephones can be used between the main site and the remote site (A & B), and site A to B works only ringing, no audio.
What is missing in the settings?
Thanks in advance to those who answer



This thread was automatically locked due to age.
Parents
  • 0

    Shalom,

    the routig table on Site A has to include Site B and on Site B you have to include Site A vice versa. Of course you need firewall rules to allow traffic from Site A to Site B directly as well. (And vice versa)

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    Shalom,

    the routig table on Site A has to include Site B and on Site B you have to include Site A vice versa. Of course you need firewall rules to allow traffic from Site A to Site B directly as well. (And vice versa)

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML