UTM9 SNMP OID for Interfaces

Hi John Williams2 

OIDs for Sent and Received bits for Interface is not available in that file. However, some other users on the community were able to successfully Query that information from UTM 9. You may try the following:

Incoming Traffic - The total number of octets received on the interface, including framing characters.
eth0: 1.3.6.1.2.1.2.2.1.10.2
eth1: 1.3.6.1.2.1.2.2.1.10.3

Outgoing Traffic - The total number of octets transmitted out of the interface, including framing characters.
eth0: 1.3.6.1.2.1.2.2.1.16.2
eth1: 1.3.6.1.2.1.2.2.1.16.3

I am going to test this in my lab environment as well but it might take some time before I can post actual results.

Ok this worked.  How did you know where to find this OID?  Also, is there some other way to validate the accuracy of the data it is providing?  Its really hard to gauge how accurate it is because the numbers I am getting in SCOM seem to be generically assigned and they don't match the numbers I see in the dashboard of the UTM for in and out on eth0 and eth1.  Thanks for your help.

Okay, I'm glad that it worked. I've found it in these threads which were useful:

https://community.sophos.com/products/unified-threat-management/f/management-networking-logging-and-reporting/33331/network-snmp-oids

https://community.sophos.com/products/xg-firewall/f/logging-and-reporting/98743/snmp-query-interface-traffic

https://community.sophos.com/products/unified-threat-management/f/management-networking-logging-and-reporting/84972/how-can-i-log-monitor-the-used-bandwidth-externally/392233

I'll have a chance to check the accuracy of the output in my lab.

Edit: I could not check it due to issues with Lab setup and some admin restrictions but I will surely post a result once I've tested with above OID.