Thread Info
  • Locked Locked
  • Replies 16 replies
  • Subscribers 10 subscribers
  • Views 14220 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

9.604 without problems?

Alexander Busch

Anybody has installed 9.604 already and being happy with it?

Best regards

Alex



This thread was automatically locked due to age.
Parents

  • Hello

    we have 2 Firewalls in HA. May I update both direct from Web Intrface? We have 6 RED 50 too outside.

    May be Problems with the updates?

    THX

    peter

  • in reply to centi Peter

    Hello Peter,

    You need to upload new updates to the master unit only in HA. The slave unit gets the updates pushed from the master.

    By installing the update there is the risk that the setting "use_unified_firmware" is switched back to 1, with the mentioned problems above . Therefore it would be better to disable the RED50 for the update and check the settings afterward before enabling the RED50 again.

    Kind regards, Holger

Reply
  • in reply to centi Peter

    Hello Peter,

    You need to upload new updates to the master unit only in HA. The slave unit gets the updates pushed from the master.

    By installing the update there is the risk that the setting "use_unified_firmware" is switched back to 1, with the mentioned problems above . Therefore it would be better to disable the RED50 for the update and check the settings afterward before enabling the RED50 again.

    Kind regards, Holger

Children
No Data
Unfiltered HTML