Anybody has installed 9.604 already and being happy with it?
I had no problems updating the SG135 in my lab to version 9.604 and the UTM seems to work fine until now.
Kind regards, Holger
URGENT ALERT: Issue with RED 50 and 9.604 which fixes the TCP SACK PANIC vulnerability
I just received an SMS alert from Sophos: Up2Date to 9.604 after powering off your RED 50(s)! Otherwise, there's a good chance a RED 50 will be bricked. Then after the before powering the RED 50 on again, execute the following commands as root at the command line:
cc set red use_unified_firmware 0cc get red use_unified_firmware
If you're running in High Availability, I believe you must also execute these commands on the Slave - at least do the second one to confirm. For that, you will need the loginuser and root passwords after doing the following as root at the command line:
The relevant Sophos KnowledgeBase article is: https://community.sophos.com/kb/en-us/134398
Sign up to receive SMS alerts yourself at https://sms.sophos.com
Cheers - Bob
I just received the following from Sophos Support:
1. Are any other REDs in danger of being bricked, or is it just the RED 50? - So far we have only seen RED 50 but this doesn't rule out RED 152. In High Availability, does use_unified_firmware need to be set to 0 on all nodes? - No it would replicate the command3. Instead of physically unplugging REDs, would it suffice to disable the RED server objects in WebAdmin before applying the Up2Date and then enable them after 9.604 has had use_unified_firmware set to 0?- In theory yes if you disable the service in the UTM or turn off the RED devices, then they won't be able to get the Firmware Update, so they won't be able to contact the server, and once you re-enable the services they will not search for a new firmware update
i had 2 dead red 50's back around the time we first upgraded to 9.6 , and had them replaced by sophos
i remember at the time setting this unified firmware to 0
currently running 9.603 and just checked the switch is set back to 1
so are we saying that every new 9.6 update resets the switch to 1 ?
so currently i have 9.603 with 2 red devices attached and everything is working , is there any comment from sophos , does it affect all red 50 devices , or only some revisions ?
if they know this is a problem- and i think they have as this happened to us a few months ago , would it not make sense to set the firmware to 0 , in the update file ? or have the change persist after updates
Thanks Holger. You recommended on another thread: NUTM-10962 [RED] Fix for RED50 does not start up after firmware update for most scenarios.