We are in the process of replacing our current WIFI APs with all AP6 420e APs. We registered all the AP to central and configured the location. However, the APs 420e radios will not come up. Getting a message: " This radio is not supported in this…

Hi All, We currently have a number of AP6 across our environment and have tried to deploy these at 40mhz, however when we do this they are setting at 80mhz which is causing them to interfere with each other. Does anyone have any advice?

I am unable to add an AP6 to a site "malaysia". ( Pasir Gudang, Johor, Malaysia ) If i select this location, no accesspoints are availeble ... or AP's added with a different (german) location are removed. Ideas why? Are the AP6 devices pre-located…

Hi all, is there an option to use the same SSID with different RADIUS-Servers in Central Wireless + AP6 ? We have to configure the same SSID for all locations ... but should use local RADIUS-Servers (we have Latency of nearly 1000msec to some locations…

Hello Since Sophos WLAN users are forced to migrate to Central... When will this function be implemented? The corresponding post is closed: Central Wireless: need multiple SSID with same name - Discussions - Sophos Wireless - Sophos Community…

Hallo, leider konnte ich das deutsche Wireless-Forum nicht finden, deswegen hoffe ich das ich hier auch in deutsch meine Frage stellen kann um darauf vielleicht eine Antwort zu bekommen. Habe gerade den ersten AP 6 Accesspoint in Sophos Central eingebunden…

What is trying to change setting here and fails? The pixeled area is a real user access.

Hi all, we have a XGS116 in place and 5 APX320 and two APX120 in our environment. As our company will definitely fall under NIS2 directive I am currently testing how to secure our internal network. We already use NPS with internal CA and all AD user…

Hello, I have several APX320 in use and we also have LLDP enabled on our switches to assign Voice-VLAN automatically to IP-phones. I recently discovered that the APX320 do not transmit any LLDP information to the switch. This should work as of this…

We are in the process of switching all of our Cisco Wireless access points over to Sophos APX 530s. We have multiple sites and have completed roughly half of them. Along with the replacements, we have decided to use Synchronized Security to allow only…

I am in the process of purchasing AP6 420E access points to replace old AP55s that are still currently in use. I know you no longer need the licensing for Sophos APs, however I must choose the lower priced option, one of which includes AP support while…

Hi, I recently (a week ago) created a central account and set up a SW SFOS for my home. The firewall is working but I don't see My Products->Wireless in central portal admin so I cannot register my AP15 to register and configure wireless.

Hi, i noticed this morning that my CM mangled APX120 recevived a firmware update. I check the XG115W AP firmware and there's no sign of an update. Please advise if updates for APX120 and the inbuilt WLAN on the XG115W will be updated? Ian

Is there an ETA when this will be available on the AP6 series? We have it on the APX series but we are replacing due to them becoming EoL. We have around 3500 APs to replace and might need to look at another vendor.

We have xgs 2100. We want to establish a wireless network for our company and we want to manage it through Sophos. So what are your access point recommendations? Also, can I use a different brand access point other than Sophos brand access points to Sophos…

Disclaimer: This information is provided as-is for the benefit of the Community. Please contact Sophos Professional Services if you require assistance with your specific environment. ______________________________________________________________________________________________________________________________________…

Hi all, In central / wireless, i've configured a simple SSID and try to add an AP6 420 . Got the message "There is an Access point that does not support this SSIDs frequency." AP is configured for Germany (2,4 + 5 GHz) Where is my error?

This is our first go around using Sophos Central to manage a mix of APX120 and APX320X. We wanted the consistency of using one wireless controller since the APX320X can't be managed by a Sophos Firewall. The firewall is a Sophos XGS 136. Several times…

Is it possible?

APX 530 on Sophos Central is using a RADIUS configuration with 111.222.33.22 (just a dummy IP) as RADIUS Server on port 1812. 111.222.33.22 is a RADIUS Proxy. Based on the requested SSID the proxy decides to sent the request to several real RADIUS servers…

Hi, yesterday I ran into trouble while trying to move an APX120 from Sophos SG/UTM (FW 9.718-5) to Sophos Central Wireless. Currently my APs are connected to LAN (VLAN1) on L2 Switches, those are connected to local Sophos XGS firewalls, via IPSEC…

How do you mount the new AP6 to the ceiling? There is a mounting bracket but if used on t-bar this pushes the ceiling Hope the pictures is showing the problem?

update to the closed thread: Central Wireless RADIUS: Roaming Clients between APX320 and APX530 lose connection when on APX530 News from our support case 06845353 as reference in case other users may face such issues. Sophos WiFi Dev Team has successfully…

Random question really, but I have noticed that the APX series and AP6 series all seem to have BLE within the APs. Does anyone know what this is intended for?

Hi - I am a long term Sophos Home XG user, who has been very happy using Sophos access points: AP30, AP100C and APX120, all managed from the firewall, which I find very convenient, as they integrate nicely. However, the Wifi 6 products are not being offered…