Hello, I don't understand how works Sophos Central with new AP6 Access Point. I need to migrate from Wireless Controller on UTM 9 to Sophos Central with APX. I have 3 networks configured on Sophos Central, as I have on UTM 9 : PRIVE-INTERCO-IOT…

Current Situation : The client has multiple buildings, each with distinct VLANs (e.g., VLAN 100, 200, 300) and a dedicated SSID per building (e.g., SSID: Wifi_Building1 for Building 1, Wifi_Building2 for Building 2, etc.). Expectation : The goal is…

Hi all, This post is to hopefully help others. Issue: The AP6 420X units were randomly dropping off the network, so the entire unit including the wifi networks, would die for 2 - 5 minutes then come back. There was no pattern to the dropouts and happened…

Hi, we have 3 ssids running, managed by Sophos Central using APX320. One of these SSIDs is a guest-wlan and we use the "Hotspot function" /Captive Portal. By now I have to do administrattive jobs as well as creating the vouchers for guests. Is there…

Dear All, We are running some tests with APX and AP6 access points managed on Sophos Central. Our APX access points are all declared on our XGS3100 and working fine with 3 types of SSIDs. One is a bridge mode to our LAN, one is for or mobile devices and…

Dear Support, We recently purchased an AccessPoint AP6 420 to extend our WiFi configuration. Prior to that purchase, we had several AccessPoints APX model that were managed by our XGS3100 Firewall On Premise. As the new AP6 must be configured through…

We had two Sophos access points which kept saying inactive and no matter what we did couldn't get them active, so we deleted them from XGS and factory reset the two access points (held reset for 30 seconds) but now they're not appearing in the XGS at…

Hi, we try to transfer our UTM-Customer with old AP-Models to Sophos Central Wireless with AP6. The Customer uses Certificate based Authentication in combination with Windows Server 2019 Network Policy Service and Active Directory integrated Certificate…

I only found a manual Scan for Wireless Neigbors in Central, hidden in the Sites menu. Can I somehow trigger the AP to chose the best free channel NOW? There are situations that are optimal for this, e.g. an empty building with no WiFi users. …

Hi all, I created a mesh network with AP6 420 APs. Works fine now. I AP is not connected to LAN but to a seperate LAN network that should be bridged into the main LAN though WLAN mesh. How to configure that? Internet<->LAN<->AP1<->WLAN<->AP2<…

Hi all, I have 3 AP6 420 APs. One of the APs cannot be connected via cable so I am trying to create a mesh network. Correct, right? All 3 APs have 2,4 and 5 GHz available. When choosing "mesh" in Central WLAN Wizard I have to choose either 2,4 or…

Hy! We have a little problem with our AP6 420. They are registered on Sophos Central so far so good. So the AP6 is in our Managment VLAN is untagged and get a IP address and can connect to Sophos Central. Now i want create a SSID with our Client…

Never set up a hotspot in the past, so not sure if I'm doing something wrong or if it's simply not working... APX320 + XGS87 + SFOS 20.0-MR1 managed from Sophos Central. I go to my Guest SSID (not bridged, goes to VLAN) and turn on Hotspot. Client on…

Since I purchased the APX530 devices, I have noticed that the access point (AP) restarts immediately when I add new MAC addresses to the whitelist. I would like to know if this same behavior occurs with the new AP6 series.

We are currently testing phase of AP6-420e APs. Is there anybody else experiencing MAC filter configuration issues..... We are testing 3 SSIDs that are on separate VLANs and each SSID is needing a MAC filter. I thought at first, I was not hitting…

We are looking to replace Ruckus wireless network with Sophos AP6 420e. Working the configuration of the Sophos WLANs config and I am stuck. I can get test client to connect to WLAN that use vLAN1 but unable to get other WLAN that are tagged (other…

Hello, I have a Sophos XG acting as my firewall. I have three floors where I´d like to install one WIFI access point per floor. Each of these APs is connected to an ethernet port of a L2 switch where also the firewall is connected to. No vlans.…

Hallo zusammen, wir haben ein WiFi-Netz in einem Hotel erstellt und es sollen Vouchers vom Hotelpersonal erstellt und verwaltet werden. Durch die Registrierung in Sophos Central, faellt die Verwaltung offensichtlich an das Admin-Personal. Die Anleitung…

Anybody have experience with importing a list of MAC addresses in to the MAC address filter? Will pasting a comma delimited in the "correct" MAC format into the ALLOWED field work? Any assistance would be greatly appreciated. Thanks in advance…

Hi all, is there an option to use the same SSID with different RADIUS-Servers in Central Wireless + AP6 ? We have to configure the same SSID for all locations ... but should use local RADIUS-Servers (we have Latency of nearly 1000msec to some locations…

Hi all, we have a XGS116 in place and 5 APX320 and two APX120 in our environment. As our company will definitely fall under NIS2 directive I am currently testing how to secure our internal network. We already use NPS with internal CA and all AD user…

Hello, I have several APX320 in use and we also have LLDP enabled on our switches to assign Voice-VLAN automatically to IP-phones. I recently discovered that the APX320 do not transmit any LLDP information to the switch. This should work as of this…

We are in the process of switching all of our Cisco Wireless access points over to Sophos APX 530s. We have multiple sites and have completed roughly half of them. Along with the replacements, we have decided to use Synchronized Security to allow only…

This is our first go around using Sophos Central to manage a mix of APX120 and APX320X. We wanted the consistency of using one wireless controller since the APX320X can't be managed by a Sophos Firewall. The firewall is a Sophos XGS 136. Several times…

Hi, yesterday I ran into trouble while trying to move an APX120 from Sophos SG/UTM (FW 9.718-5) to Sophos Central Wireless. Currently my APs are connected to LAN (VLAN1) on L2 Switches, those are connected to local Sophos XGS firewalls, via IPSEC…