Hello, I don't understand how works Sophos Central with new AP6 Access Point. I need to migrate from Wireless Controller on UTM 9 to Sophos Central with APX. I have 3 networks configured on Sophos Central, as I have on UTM 9 : PRIVE-INTERCO-IOT…

Hi, My APX120 will not update to CM where it is registered because the SSL/TLS fails the certificate. How do I enable the APX120 to received a new certificate? Ian

Hello, in the device overview, only the MAC addresses are displayed as the device names of the connected clients. Is it currently not possible to display the host names? Olaf

Hi, we migrated a site from XG210 to XGS2300 with SFOS is 20.0.2 . They have three Access Point APX320 and four Access Points AP55C. The APX320 work fine, but of course the AP55C don't work anymore with the XGS. Now we wanted to register the AP55C with…

The checkbox for an AP6 420E says: "Band steering: Dual-band capable wireless clients will be steered to 5 GHz by default." Is this just old phrasing, or does it only apply to 2.4 GHz and 5 GHz, but not 6 GHz? Or is it no longer necessary with WiFi…

OBSERVATIOBN: Love the new AP6 420E, but man was that a painful experience. It accesses multiple sites -- apparently using QUIC -- so had to disable SSL decryption entirely and QUIC prevention entirely, and other stuff as I flailed around trying to get…

I only found a manual Scan for Wireless Neigbors in Central, hidden in the Sites menu. Can I somehow trigger the AP to chose the best free channel NOW? There are situations that are optimal for this, e.g. an empty building with no WiFi users. …

Hi all, is it possible to combine AP6 series APs managed by Central and the local WLAN from XGS126w to work as one? If yes I didn't find entry info. Thanks for hints Gernot

Hej all, We manage around 80 XGs at the same number of locations with around 250 AccessPoints (APX120). With our last order, we realized that the APX120s are no longer available. Now we have received two AP6-420s and have to learn that they are not…

Hallo, hab ein Problem mit den AP6 und Sophos Central. Die Access Points wurden registriert, werden aber nicht in Central angezeigt. SSID kann ich auch nicht erstellen, wernn ich auf erstellen klicke bleibt die Seite leer. Hab mehrer Browser versucht…

Hello, Our WLAN administration was moved to the cloud (Sophos Central) after switching from the XG135 firewall to the XGS136. In the XG135 we were able to upload a PDF as a template for voucher generation. This PDF contained various keywords, where, for…

Hallo, leider konnte ich das deutsche Wireless-Forum nicht finden, deswegen hoffe ich das ich hier auch in deutsch meine Frage stellen kann um darauf vielleicht eine Antwort zu bekommen. Habe gerade den ersten AP 6 Accesspoint in Sophos Central eingebunden…

What is trying to change setting here and fails? The pixeled area is a real user access.

We are in the process of switching all of our Cisco Wireless access points over to Sophos APX 530s. We have multiple sites and have completed roughly half of them. Along with the replacements, we have decided to use Synchronized Security to allow only…

Hi, I recently (a week ago) created a central account and set up a SW SFOS for my home. The firewall is working but I don't see My Products->Wireless in central portal admin so I cannot register my AP15 to register and configure wireless.

We have xgs 2100. We want to establish a wireless network for our company and we want to manage it through Sophos. So what are your access point recommendations? Also, can I use a different brand access point other than Sophos brand access points to Sophos…

This is our first go around using Sophos Central to manage a mix of APX120 and APX320X. We wanted the consistency of using one wireless controller since the APX320X can't be managed by a Sophos Firewall. The firewall is a Sophos XGS 136. Several times…

APX 530 on Sophos Central is using a RADIUS configuration with 111.222.33.22 (just a dummy IP) as RADIUS Server on port 1812. 111.222.33.22 is a RADIUS Proxy. Based on the requested SSID the proxy decides to sent the request to several real RADIUS servers…

Hi, yesterday I ran into trouble while trying to move an APX120 from Sophos SG/UTM (FW 9.718-5) to Sophos Central Wireless. Currently my APs are connected to LAN (VLAN1) on L2 Switches, those are connected to local Sophos XGS firewalls, via IPSEC…

update to the closed thread: Central Wireless RADIUS: Roaming Clients between APX320 and APX530 lose connection when on APX530 News from our support case 06845353 as reference in case other users may face such issues. Sophos WiFi Dev Team has successfully…

I have just purchased 4x APX320s and they are all connected to my Sophos Central Account. I have installed the first one, and noticed that the throughput seemed slow but very reliable and stable at ~270Mbps, the LAN is all 1Gbps and the WAN is 900Mbps…

I have created an AP6 SSID with RADIUS 802.1X. So far so fine. Now, whenever I add or remove an AP6 AP and click save, I get this error An unexpected error occurred while processing the request When I cancel afterwards, the change has been applied…

I'm running Sophos XG with 5 APs (4 AP15 and one AP55). All are registered in Sophos Central an appear live and up to date in the Access Points page under wireless. But when I go to the Firewall Management Report Hub, under the Network section it shows…

Will APX Series management in Sophos Central remain free to use? Will AP6 Series require extra licensing for Sophos Central Management? DACH Region.

After adding a new AP6 access point to my site on Sophos Central, I tried to add the AP to the floorplan, and it is greyed out and says "AP6 not available at this time". Seems really odd that this is not available...how different could it be from the…