• IPv6 and how it relates to IPv4 on the UTM?

    Louis-M
    Louis-M
    As IPv6 becomes more prevalent, I think it might be useful for Sophos to explain how this works with the UTM compared to IPv4. For instance, if you have a block of 8 IPv4 addresses, you enter these addresses in as additional addresses under interfaces…
    • over 8 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Random clients losing ability to connect to UTM

    brendan.daniel
    brendan.daniel
    Hi all, This is truly a weird one and I hope you can help me find a solution. We have 2 ASG525's running in active-passive HA. Last night I updated one to 9.353-4 but this problem was occurring on the previous version over the last week, I was hoping…
    • over 8 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Slow OpenVPN (kinda fixed) - Help with exceptions

    AaronPaap
    AaronPaap
    Hi, So I have kind of fixed the slow ssl/openvpn issue, but I can't seem to find a way to put the exception in. - Part 1 of the fix was to disable the UDP flood protection - get 1.5-2mbit (otherwise caps out ~0.5mbit) - Part 2 disable IPS get full…
    • over 8 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • ICMP Settings Question

    BradBoudreaux
    BradBoudreaux
    I'm having an issue that is kind of stumping me. I installed Sophos UTM and have been using it for some time now. The one thing I can't get to work is this: How can I allow pings on my internal interface while denying them on my external interface.…
    • over 8 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Turning extra 6 LANS into "router" like links (UPDATE disconnects in 13-15 minutes loops)

    DavidG1
    DavidG1
    Hey all I just finished up setting up the UTM 9 Home edition and I currently have it up and running with eth0 as the WAN and eth1 as the LAN. However, my motherboard has a total of 8 Ethernet ports (though 2 are being used for WAN and LAN out of the 8…
    • over 9 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Setting up a Guest Access Point in UTM

    chipwade
    chipwade
    I am running a setup with a bridged FioS modem giving me a single public IP, ESX host with internal/external vSwitches, and the Sophos UTM. I am currently running a wifi router through the UTM with all of my rules in place and it is working great. I would…
    • Answered
    • over 8 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • publish exchange server on second wan interface with static ip address

    StephanHanau
    StephanHanau
    Hello experts, following configuration: UTM with 1 LAN-Interface and 2 WAN-Interfaces (1 x ADSL 50 MBit/s = default GW (Interface A), 1 x ADSL 16 MBit/s with static IP (Interface B)). I want to publish the Exchangeserver over the second WAN-Interface…
    • over 8 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Am I Missing Something? Firewall rule not blocking tracert

    Keith Virgo
    Keith Virgo
    UTM 9.3 Software version Onboard NIC - WAN Dual NIC Card - Internal Networks. I have just set up and activated the second internal network. I want to keep the two segmented and understood this was by default. However, when I tracert a device on network…
    • Answered
    • over 9 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • Latency on initial VOIP connection, only occurring on Speaker-phone to speaker-phone calls

    JasonMarzetti
    JasonMarzetti
    Hi all, I've opened a ticket with support, but thought I'd get some input from the community first. Here is the issues, as stated to support: Greetings, We're having an intermittent, but fairly frequent issue with latency on our VOIP phones. The…
    • over 9 years ago
    • UTM Firewall
    • Network Protection: Firewall, NAT, QoS, & IPS
  • View related content throughout UTM Firewall
  • More
  • Cancel
<