Hi, We have a serious issue with a new AP we just received. The AP in question is the APX530. It's hooked up to a port on our Cisco switch which is a VLAN Trunk-type port, able to connect to all of our VLANs (more on this later), with the standard VLAN…

I just replaced our old Apple "AirPorts" with Sophos AP 100C access points. When I enabled Wireless Protection I did the following: Enabled Wireless Protection with "Internal" as the allowed interface. Created a matching wireless network, Bridged…

Sorry for the frivolous question, but ... I am replacing my current access points with Sophos AP 100C models, to be run from the current UTM 9.7 software. The AP 100C is designed to be hung upside-down from the ceiling, with the Sophos logo facing down…

I have an open ticket on this issue however; I am not receiving a response. I recently transition our wireless environment to support VLANs. We a had 2 networks that were set to bridge to the AP LAN (VLAN 2). I disabled those networks on our access points…

Morning all. decided to install Sophos UTM as my firewall (from a custom Linux box) and have a question about the wifi management... Can Sophos UTM manage non Sophos Wifi APs? or should i just create a VLAN, and associate that VLAN with the wifi network…

Sophos UTM Home 9.705-3 AP15 single AP - no mesh Single SSID enabled I have been running UTM home for six years (2015) and the AP55 for five years (x-mas 2016). Last night, like happens a few times a month, my AP55 stopped allowing client association…

Setup : Hardware: SG135 Software: UTM v9.705-3 APs: 2x AP55s Non-Standard Config: AP Country set to US (not to my actual location), for hardware compatibility reasons Problem: For at least the last year, wireless devices on my network have been intermittently…

Hi Everyone, The organization want to implement QR code for visitors accessing the Guest Wifi. The details of the QR code need to contain simple details of the Guest Wifi SSID simlar to image 1, in this way, device automatically gives an option…

I have some AP55s connected to a XG230. They are broadcasting 1 SSID, Bridge to AP LAN, with no problems I would like them to broadcast another SSID (called guest) on a seprate VLAN. What's the best way to set this up? I can create the wireless…

Hello, I'm very tired of searching the web for an answer to my issues with my Wifi setup on my Sophos UTM. What is my setup? Sophos UTM 9.505-4 AP-55 What is my goal? Creating two SSIDs: The users of SSID A can access the internal…

Hello Sophos Community Members, I would like to share you my Wireless scenario. Current scenario : 1 network with 1 SSID : Eg. ABC , Domain controller : DHCP, Combination of Sophos APs and Delink Wireless Devices all with the same SSID. Domain…

I have been having a persistent issue at a client site where devices cannot connect to the wireless networks after a certain amount of time. this has been forcing me to disable then enable the networks every day to allow devices to connet again. …

Hi folks, I've spend much time to understand why on my guest wireless network I'm unable to reach some site link quora.com or temaviewer.com.. finally I try to disable client isolation and all works fine.. but why?? is not a web filter problem, with…

Hello, I am running a 115w on 9.411-3 with the internal WiFi at 2.4GHz and bridged to AP LAN for over a year now with no problem at all, but since about one week I have noticed that the wifi keeps failing almost every day on almost the same time (19…

Hi There, I just bought my first AP50 for my UTM Home and tried to install it. I connected to the UTM successfully and gets marked as active, I can even configure it. The weird thing is, it does not broadcast its radio. The two LEDs for 2,4GHz and…

Hi to all! Ok i'm sure i missing something but this is what really happened! I configure a WiFi Network bridge to a VLAN with an Hotspot and voucher. I connected to this wifi network with a voucher code and after some time i wanted to remove that device…

I have a SG125 with the latest software and updates etc. and 2 x AP15 access points on the LAN. First of all is there a document explaining the best practice for setting this up with a Guest WLAN? The "Staff" SSID is bridged to LAN AP and a "Guest…

Hi there, I have a SG 125W and an external AP-15 configured with internal and guest SSID's. The AP-15 works fine I can manually set the channel to the required channel correctly and users are able to connect and the system works very well. When…

Hi all. We have a 320 UTM with firmware 9.405-5, one AP30 and two AP15. Currently, there is a wireless network with WPA2 Enterprise on a Windows Radius and a guest network with Hotspot enabled. Everything working fine. Now, when we add a new AP…

Hello Im trying to get the following working: I want one SSID for access of the internal network (without vlan tagging, 192.168.43.xx) -> Bridge to AP LAN And one SSID for our guest network (with vlan tag 40, 172.16.29.xxx) -> Bridge to VLAN Now…

Hi, We just got a pair of AP100s for our UTM9. I'm also making a switch from Apple Open Directory to Active Directory. I have my AD server up and running (and working). I enabled Radius and got it working; it works for VPN clients. However, Wifi clients…

Hello everyone, is there a way to define a Hotspot with a session length of more than 1 week? Colleagues are complaining, they have to renew their phone-logins every week. I understand this, but I found no other way. I need to distinguish Mobile-Phone…

Hi group. i just installed the asg-9.351-3.1.iso (ASG Software) to a computer. it's running firmware version 9.351-3. once installed, i went on the web gui, to finish setup and when it was asking for network, it did not displayed the WIRELESS card…

I am trying to configure a Hotspot on our wireless network that uses back end authentication from our AD server. I have successfully created a hotspot that is being broadcasted on our AP's when you try to connect to the SSID the login screen appears and…