Hello everyone . I have a problem with the configuration of the PXE/SCCM taking the XG as DHCP . Here is my config - next server: ip address of my TFTP server (SCCM&***; - Boot file location: SMSBootPM100003\x64\wdsnbp.com I get this error ( TFTP time…

Hello we have SG115 UTM in our network and remote location connected to us by SD-RED 20 device. we have internal windows DHCP server for assigning ip to users but remote location users can not get ip from our windows DHCP server and we have to use…

Hello, all, First of all, apologies if this is a discussion somewhere else; I looked but couldn't find anything. I keep getting " [INFO-109] Dhcp client not running -not working/restarted" a few times a day. I'm running home version 9.711-5 on a UTM…

Hello, I decided to leg go the configured network for AP sau WiFi in order to use the IP's to the new internal VPN server and have them routed throught Sophos UTM. Right now i have: Interfaces: AP-WiFi on eth0 [10.0.0.1/24] HUM-WiFi on wlan1…

Hello together, I would like to use the UTM home as a DHCP and DNS server. I have already configured DHCP. I use home.local as the domain entry in the DHCP settings. This is also correctly displayed as suffix in the Windows Ipconfig settings after a…

Hey guys, I have a Problem with configuring the dhcp relay on a Sophos SG 330 (9.705-3). We want to use a RED60 (standard/unified mode) to manage our branch office, so we attached it on a ISP Router on a different DSL-Connection for testing purposes…

I am trying to configure VLANs for my WiFi and I am having problems and I am not sure if its the WiFi system, the HP switch or the Sophos SG135w UTM 9. I currently have 6 AP's to cover the whole site, 3 x UniFi AP and 3 x UniFi AP-Pro they end up in…

Hello, I came across this thread https://community.sophos.com/products/unified-threat-management/f/management-networking-logging-and-reporting/32566/solved-dns-best-practice#pi2353=2 , and tried to adapt my config like you recommend, but i have some…

Hi everyone, I know there are threads addressing Chromecast issues, but I have tried all of the suggestions in those threads and can't seem to get mine working with the UTM. My HP printer, cell phone, and Mac Book all pick up wifi just fine, but Chromecast…

Hi all, hopefully a simple question: Can you centralize the host-lists when using only static mac-mappings for dhcp leases in multiple locations? Basically I set up the DHCP in a testlab to prevent connections of private/unwanted devices. To do so I…

Is there a way to define multiple WINS servers in the DHCP Server for Sophos UTM 9 ? The 'Advanced Options' section in the DHCP Server definition will only take one. I have also tried adding option 44 in the Options tab (which should allow an IP address…

Hello, I'm running Sophos UTM 9.503-4 on a pcengines APU board behind a FRITZ!Box Fon WLAN 7360. The UTM is configured as exposed host on the Fritz!Box and the UTM provides DHCP and DNS for my LAN. There are no other DHCP or DNS servers and I don't…

Hello everyone, I am using SOPHOS ASG Software last version "9.411-3", and I would like to add 060 option, but I don't found it in the codes list, please kindly confirm the possibility of using this option in my firewall model, because I found a solution…

The setup: Sophos act as DHCP Relay Agent Client Interface: eth7 (192.168.0.1) Transit Interface to DHCP-Server: eth2 (192.168.10.1) DHCP-Server 192.168.100.1 Relay Agent is set to 192.168.100.1 Requests go through to DHCP-Server but the…

I have a problem with my UTM in conjunction with my ISP's 2Wire 3801HGV whenever the UTM gets updated to 9.354-4 or higher whereas the 2Wire's DHCP ACK response seems to not be recognized by the UTM. I am asking the community what steps I should do…

Here is our current setup. Sophos UTM at the Gateway. A Dell PowerConnect 2824 managed switch, VMWARE esxi 6.0 running our virtual servers. Our accounting software has been locking up and I was advised by them to add them to their own vlan that network…

Trying to move my DHCP scope back to a Windows server, using the relay option. Clients get's the IP and DNS servers, but they don't get the default GW? Running the same direct from UTM works, and the same direct with a client on the same vlan as the…

Hi All I have and a number of customers have had problems with WAN links using Dynamic IP. If this link state changes up/down standby the UTM will change the MTU size from what was set (usually 1500) to 576. Can be very frustrating. A number of…

Hi, we're currently using an UTM-9 on an sg210 hardware. Both our DNS and DHCP needs for the internal networks are currently handled by a small linux VM. I'm thinking of moving both services to the UTM-9. There're currently ~600 entries (A- and CNAME…

Hi there: I could really use some suggestions. Been running the home version of UTM 9 (Firmware version: 9.405-5) for a few months now with no issues. My WAN connection on eth1 had been an ADSL using PPPoE, but this last weekend I finally got bumped…

Under Wireless Protection I Can click at Wireless Clients to see what clients are connected to the WiFi. Can I do the same for LAN devices? I do have DHCP enabled on the UTM.

Hello all... New to Sophos I'm very excited to have found this free UTM for home use as I simply do not feel I am in control of my home network. I have set up the Sophos on a Dell Optiplex 780 (I think) and added NICs to a total of 6 interfaces. What…