Hello everyone, We recently switched out a broken SG 105 device for a customer. When i tried to install the device with the backup file I wondered why i couldn't get to the Web-Interface of the device on Port eth0. When I tried Port eth3 it worked…

Hello folks, we're currently still using very old Dell PowerEdge R310 nodes and Sophos UTM 9.7 (latest) as a SW Appliance in an Active/Passive Cluster. Each node has 6 NICs whereas 2 use LACP for WAN and 2 more w. Active/Backung Bond on LAN and the…

I have been using Astaro/Sophos UTM for over 12 years now. The one thing that confused me was the one step not discuss regarding HA. There is no information/direction about creation of the 'Slave' node. Directions always begins with a n existing UTM to…

Hello everybody I have a Sophos UTM220 at home. Now I want to put it into operation. The only option is with the home license. However, when I want to upload the license there is always an error ..., Does anyone know what I have to do? Many T…

We currently have a set of UTM220 devices in a cluster. We recently received a pair of SG 230s to upgrade to since the UTM220 is end of life. What are some steps to follow in order to upgrade to the new units? Can anyone give a step by step or a summary…

I am using UTM9 for site to site SSL VPN functionality which is working fine with on-prem installation and AWS. I have to configure HA mode for On-Prem set up. I got another VM booted up with ISO in same subnet with same configurations as the existing…

I'm looking to replace my current home UTM solely because I just upgraded my broadband to 200Mb/s. I can afford the SG-105 and possibly the SG-115 but that's about it. 1) Does the SG-105/SG-115 "base appliance" include the "Essential Firewall Edition…

We created VMs in our environment, using our internal IP space, and loaded the Sophos ISO. We could not reach the web installation GUI on these servers until we logged into the console and manually added our default gateway address. That then allowed…

Hi, ive beeing trying to install the UTM Software on custom Hardware using the latest Vesion (9.5). I installed from USB which made some Difficulties, but by using "mount /dev/sdb1 /install " it finally worked. But now i cant get the Webinterface to…

Hi all, there are plans to unlock Sophos sandstorm for Home license users? If it is already possible to use it as home user, how to get it? Regards Dwayne

Hi, are there plans to develop a UTM 9.6 or a UTM 10? It's disappointing to see that Sophos don't care anymore about UTM, although so many people are thinking that UTM is much better than XG. Regards Dwayne

I got an used UTM 220 appliance cheap and thought I would put UTM Home on it. Loaded fresh install from iso. connect laptop to eth0 (LAN) and it gets no network connection. tried hard coding an IP on laptop nic, still says no network connection. The green…

TL;DR: THE MOST IMPORTANT LESSON LEARNED: If you plan to continue with Sophos, start making regular configuration backups now and save ALL the backup files where you can recover them in the future. When we got the UTM 120 three years ago, I configured…

Hi, where's the download link for the UTM home in the "Free Tools" section? Regards Meghan

We're running SG135 in HA/Cluster mode. Recently we updated to the latest version 9.502-4 and a few hours later had serious troubles with a RED Box which failed to connect to Sophos SG135, only after rebooting SG135 it started to work again. During this…

Hi, we have 2 SG650 and both machines are connected via port eth0 [MGMT1] to administrate these. At the moment our active-passive cluster ha interface is on etc2 [A1]. Does something speak against it to switch the HA interface onto eth1 [MGMT2]…

Hi, Wich PCI-E W-Lan cards are compatible with UTM Home to use wireless protection? Thanks in advance - Meghan

UTM 9.501-5 Windows server 2012 domain controller. I installed the 9.5 update on June 2, did not see any issues with this for the client, updated to 9.501-5 on June 12 midnight, and Internet access is failing on multiple sites. Can get to Google…

Hi all, When trying to upgrade my Sophos UTM (Home license) from 9.413-4 to 9.500-9 it keeps failing. This is what the log is showing: 2017:06:07-14:18:41 heimdall auisys[29379]: no HA system or cluster node 2017:06:07-14:18:41 heimdall auisys…

All I have a client with a Sophos ASG220 rev. 5 running on a software license (recovered unit, dead HDD replaced with an SSD, RAM upgraded) and they're complaining about the noise coming from the fans. I'm planning to replace them with Noctua A4x10…

I created an interface bridge. I configured ip address on it. And now int is not working as i wont 1. HostONE connect to any port works correctly (dhcp, ping) 2. Any other host connected to any port in brigde does not work (dhcp, on…

Hi, I bought a Mitac E230 ( http://client.mitac.com/products-Embedded-Box-PC-PlutoE230.html ) with the express reason of installing UTM, I have build a number of USB installers and have gone so far as to buy a DVD rom (I know) to try but it won't pick…

Hallo zusammen, hat jemand die DrayTek VigorNIC 132 mit UTM 9.408 zum Laufen bekommen? Ich kann die Karte einbauen, SophosOS erkennt den Netzwerkchip. Wenn ich der Karte eine IP Adresse zuweise, dann kann ich sie remote anpingen, allerdings lässt…

I have 2 SG430s in HA, and heartbeats working fine. My next step is to allow seamless failover. Currently there is an internal facing, and external facing interface on the master UTM. When a failover occurs, (ie. firmware update) and the roles switch…