Hi Community, we're experiencing a weird problem. We have just got installed a new router from our service provider which connects us to a 192.168.200/24 where our Telephony Server is located. There is a working route on our coreswitch( 192.168.14.39…

We have recently had an internet speed upgrade which gives us 1Gbps Down & Up to the internet. When running a speedtest connected directly to our network in the office we are getting around 950mbps. When the client runs a speedtest while disconnected…

The environment: Firewall: Sophos UTM 9, Model SG330, Firmware 9.710-1 Remote Access (SSL) running more than 2 years now - with the Sophos SSL VPN Client on a HP Elitebook with Windows 10 Pro. I setup another HP Elitebook (same Model) with Windows…

Hi, we use a SG550 and our vpn admins (with the Right Remote Access Manager) are not able to download the SSL VPN Package via Webadmin, (Definitions & Users, Users & Groups, Action Download SSL VPN Packages). This is because they don't even see Users…

Can we change the timeout for a specific Remote Access-->SSL user.

Recently, we have put a RADIUS Server within our environment and rolled out OKTA as our MFA platform for VPN. I know the expected behavior is for any user that has OTP/MFA enabled to disconnect the VPN after 8 hours. But we have noticed, after the…

Hi, I have two sites connected over IPSec VPN using some third party routers. 192.168.10.0/24 - primary site 192.168.9.0/24 - secondary site I have my UTM running as a VM in the primary site with just one network interface. It is used primarily…

Good Afternoon Everyone, Setup: Sophos Firewall - SG115 Old Servers - MS Windows Server 2008R2 / PowerEdge R710 Active Servers - MS Windows Server 2019 - PowerEdge R440 User - Dell Latitude 5580 Situation: We recently did a server migration…

Is there a way to implement 2FA (e.g. with Authenticator App) for the SSL VPN Client? We currently use the Sophos SSL VPN Client for our remote access. The access control for groups & users and their authentication is done via ActiveDirectory.

I tried to install the Sophos SSL VPN Client 2.1 from the UTM user portal. I am getting an error "An Error occurred installing the Sophos SSL VPN adapter driver" So, I tried so many things and finally it is working for me. You can also try it…

What, exactly, is this? I'm the user who wants to access our small company's network. I want to access the VPN from multiple locations, and my IP addresses are issued by ExpressVPN. So, say, I might be in a Starbucks in Miami trying to access our development…

Hi There, First of all the Windows Server is not part of a domain it's just in a workgroup and had no domain name associated with it. The Sophos UTM9 is at 192.168.16.1 on the internal network, the UTM is providing DHCP, all 192.168.16.xxx numbers…

Right now the users can simultaneously access their local network as well as the vpn network. Could someone help me to configure ssl-vpn in such a way that when a user is connected to vpn network the local network must be disabled and all the traffic…

I'm using the Sophos SSL VPN Client to connect to my work computer from home, but I also want to make some large downloads on my home internet connection. I'm aware that the way to do this is via Split Tunneling, but I've been unable to find any clear…

Hi all, I am having issues with OpenVPN Connect after updating OpenVPN to 1.2.6. It will connect then drop out randomly, but still appear to be connected once dropped out. When you turn the VPN off and back on it works until it drops out again…

Hi, I was asked to configure Sophos UTM for VPN usage with OTP and IPAD . Someone successfull with this Task? Which VPN-type is usable? I need some hints how to accomplish this.

Howdy :) I'm a recent convert from PFSense. I now use Sophos UTM 9 (9.506-2) on the same hardware (Supermicro A1SAi-2750F - so an Atom C2750 SoC) I have a 100/100 Mbps Internet link. Everything works very good, as expected. Everything except Remote access…

OK, so we have some software on the network that licences users by IP address. When a laptop is taken out of the office and uses a remote connection to dial in (either by using a RED or by Sophos SSL VPN client) they are obviously assigned a different…

Currently running UTM 9.501-5. Running into an issue with accessing the User Portal and then downloading the utility to install and launch the Remote Access VPN IPSEC pool. Worked wonderfully in the past, but I have not used it in many months because…

Hello, I was wondering, is there a way to restrict bandwidth usage on a user to user basis with SSL VPN users? I already have a QoS rule in place limiting each user to 2m down, but I want some users to have a little more or a little less. Is this…

Hi Guys, Just joined this community and this group. So be patient for this noob here. :) I am currently doing a project which expects users to be able to remote access their VOIP system when they are out of office. And this can be achieved supposed…

We have a problem occur with a win10 user whom connects via OpenVPN SSL to our SG230 (fw 9.405-5). This was reported for the first time over the weekend, and does not happen to other users. Remote users should only go through the VPN for remote access…

Hello, I try to use VPN on iOS devices, but I´m facing serious problems since OpenVPN was updated to 1.07 for iOS devices. I cannot establish a connection anymore with the previous versions of OpenVPN and/or Sophos UTM I was able to connect. Log…

i have configured Remote Access via SSL , after enabling user portal . am not able to connect to the user portal from the internet " out side of the organization " i have public static ip configured on e02 and its the SSL Confectioner and e01 having…

Hi all, I am trying to migrate RAS SSL openvpn from an existing setup to sophos UTM 9 and I am struggeling with sophos certificate management. The existing openvpn setup works well and from a certificate point of view looks like the following: rootCA…