Hello Guys, I am currently trying to setup two different IPsec VPNs. The first one is to simply connect to our Network and the other one is to route all traffic threw the firewall, if you are in a cafe for example. So far so good. They both work…

We have recently had an internet speed upgrade which gives us 1Gbps Down & Up to the internet. When running a speedtest connected directly to our network in the office we are getting around 950mbps. When the client runs a speedtest while disconnected…

Hi, for a few days now, the SSL VPN cannot be connected if there is an ' inverted comma in the password. We use OpenVPN 2.5.6. Do others have this problem too? Error: Options warning: Bad backslas. Is it caused by a pattern update?

Hi, we use a SG550 and our vpn admins (with the Right Remote Access Manager) are not able to download the SSL VPN Package via Webadmin, (Definitions & Users, Users & Groups, Action Download SSL VPN Packages). This is because they don't even see Users…

utm version is 9.707-5 I use the utm for routing and network security on my home network. I have a subscription to a vpn service provider. The vpn protocol is openvpn (over udp). When I start the vpn service's client on my macbook and enable the vpn…

Hello, I have configured VPN Server on Sophos UTM over IPsec on S2S. When i connect to the server using OpenVPN Client on my windows laptop, and run Extended test to check for DNS Leaks - http://dnsleaktest.com/ - I can see DNS servers and server…

Hi, I have two local interfaces enabled. Interface 0 WAN Interface 1 192.168.10.1 Interface 2 192.168.40.1 I am connected to VPN I want to remote into 40.x devices but I dont seem to be able to ping 40.x network at all. I can communicate with…

Situation: We now have many users working remotely that don’t need resources on the private network – everything they need is cloud based. Therefore they have no need to make a VPN connection to do their work. The Windows 10 AD-member PC ends up…

Daer all, I created SSL VPN in Sophos UTM 9 and clients are connected successfully, but not able to connect VPN clients to local network and gateway in VPN client not showing . Please find the below configuration and help me to do the same. Remote Acces…

Hi How can I find which version of StrongSwan the current Sophos UTM is using? We have an issue with a Site-to-Site VPN connection and the counterparty is asking for it. thanks and best simon

please can you help me in solving this problem am having new sohpoe firewall and i tried to setup site to site vpn with another old one this error comes out sent MR3, ISAKMP SA established 2018:05:15-16:58:17 pluto[25761]: "IPSEC" #4: responding…

First of all sorry for my ignorance but I would like to know what exactly afcd does, I couldn’t find any information about it in the help and the forum. My problem is that it seems to limit my VPN speed by using all the cpu and it would be great if I…

Hi. Can you help me with this problem that appears in VPN configuration: 2018:01:23-17:04:57 shopos_amazon pluto[7027]: packet from xxx.xxx.xxx.xxx:500: Quick Mode message is for a non-existent (expired?) ISAKMP SA 2018:01:23-17:05:23 shopos_amazon…

Hi! I can't get my SSL-VPN to work, I followed Sophos own guide for setting this up, only changing the port. See below for settings. The log outputs the following: 2017:11:10-14:47:05 openvpn[25581]: TCP connection established with [AF_INET…

Is there any problem with installing the Sophos IPSec client (11.x) and the Sophos UTM SSL VPN client on the same computer? Is there any conflict between the two clients? Only plan to make a connection with one client at a time. I just wanted to know…

Hi, We have UTM 9 (9.501-5) deployed in AWS for VPN purposes and it was working fine for about 1 year, but since a few weeks now we're having major problems. Every day the VPN becomes unresponsive and in the openvpn.log files we see thousands of lines…

Hi all, We use Sophos UTM V9 for a lot of things and have always been very pleased with the quality and supported features. In the past, we also used Sophos UTM for a site to site IPSEC-VPN tunnel to a virtual network on Microsoft Azure. Not anymore…

Hi everyone, i have the following sceanrio. UTM with Firmware 9.502-4, Windows Server 2012 R2 with Network Policy Role and Windows 10 Client At first i have generated a certificate under Remote Access -> Certificate Management with the Name vpn…

Hey Everyone, I have an IPsec tunnel connecting multiple offices together and was wondering if someone could guide me to a better solution possibly? My Question is that I am having data being transferred between the different sites continuously…

Hi All, I am hoping you guys can help me, I have been working on this for the past 8 hours with no luck We have recently changed our internet provider for one of our satellite offices in a remote part of WA Australia. The previous connection was a…

Hi We have a Sophos UTM 9 running firmware version 9.405-5 attempting to connect to Fortigate 60D firewall but no joy. The logs show no connection being made on either ends of the devices, public ip's are reachable from testing. The policy on both ends…

Hi all- Hoping for some help with an ASG320 running UTM9 9.3x software. Recent setup, running VPN remote access PPTP in a windows environment. The current setup is using the UTM9 as a firewall/network protection. VPN currently works, but I cannot…

Good morning, Does anyone Else have the problems or have an idea what the problem might be. We have a Headoffice Thats has a Server Running a ERP. the database Uses Firebird. when we connect to the server in the headoffice the program runs great.…

So i have no other choice but to post here ans hope for the best. I have Sophos UTM9 on an ESX server at my house and at my buddies business. Both locations are behind a NAT router, my home setup has a ZyWall SUG20 as the main gateway/router. I (so…

We have an L2TP over IPsec VPN that works but I'm trying to optimize it. (My networking knowledge is not great, i've searched for several hours on the web looking for solutions before asking here) I can't figure out how to get the UTM to act as our…