Site-to-Site VPN IPSec - Routing with identical Remote Networks
Hello Guys,
here is a quick and dirty illustration of the current setup:
The hosts sit all in de same internal subnet 192.168.150.0/24 and the remote offices all have there unique subnets. Till now.
A new customer have the same Subnet as an already…
Routing through IPsec tunnel to Juniper Gateway
Hello,
I have the the following VPN setup:
Remote site: Local site:
NET: 10.14.26.0/24 - GW 10.239.29.1 - 10.239.0.0/16=(Juniper GW <Tunnel> Sophos GW)=172.16.255.0/24
In order to reach the 10.14.26.0 network from the local site, I would add…
How can i creat site to site vpn between sophos UTM9 and TMG2010?
i creat site to site vpn between sophos utm9 and tmg 2010
CISCO ASA 5515 to UTM 9.4 (SG230) VPN Peer ID
Our connection seems to be completing phase 1, but is failing on a matched/mismatched Pair ID. The thing is that the pair id actually matches, but the log says that it doesn't, but shows the same two words there.
I don't have access to the actual cisco…
Site to Site SSL VPN failing when sending traffic through
Hi All,
I am hoping you guys can help me, I have been working on this for the past 8 hours with no luck
We have recently changed our internet provider for one of our satellite offices in a remote part of WA Australia. The previous connection was a…
Outgoing VPN
I've got a UTM working fine as my home gateway, talking PPPOE to my ISP.
I'd like to be able to funnel either some or all outgoing traffic via a VPN, in part due to the UK's new Investigatory Powers Act, a.k.a. the "Snooper's Charter" (Not for any particular…
AWS VPC Site-to-Site VPN - Splunk Forwarder Traffic on TCP 9997 Stopping at UTM
I used to run OpenSwan EC2 instances to connect two regions. I'm using centralized monitoring for instances with Splunk so I have installed Splunk forwarders on all instances that send their logs to a Splunk Indexer in Ireland. It worked for the most…
AP55 at remote office behind IPSec Site2Site VPN
Hi all, we are trying to set up an accesspoint (AP55) at a remote office managed by the central UTM at our headquarter but it wont work. On main site we have a SG550 running 9.403, offsite an ASG120 running 9.405. Both are connected using an IPSec Site2Site…
RE: SSL VPN issue after UTM upgrade to 9.404-5
Hello,
I had the same issue this last 15 days.
After many test, it's worked for me.
I think that this settings are important for SSL VPN to work.
In the both Server and Client UTM the hostname must match the public ip address. (Check by Whatismyipaddress…
Site to Site IPsec VPN with Lancom using 1:1 NAT
Hello Guys,
i have the following Problem:
I have 2 LANs that i need to connect via VPN. one with the UTM 9 and one with Lancom Router. Both sites have deferent IP-Ranges, but unfortunatly the IP-Range from the UTM side is allready used for a deferent…
ipseipsVPN tunnel between two branch sites (one of which has a RED)?
So, I have been given the task to transfer data between two of our branch sites.
Currently, our company network uses a star-like network arrangement with our branch sites connected to HQ through VPN tunnels - network traffic can flow between a given…
3 UTM S2S IPSEC VPN Version 9.403-4 failure after successfull deployment
I have 3 active UTM running 9.403-4 They were deployed in a hub VPN connection last month and one has been stable and the other needed to be rerouted in order to connect.
Primary LAN is 10.57.1.0/24,
Secondary LAN 10.57.3.0/24
Tertiary LAN10.57…
RE: IPSec VPN keeps down after DSL lines reconnects...
I spend several hours to the same problem
Site 1: SG135 Appliance 9.402-7 (initiate connection)
Site 2: UTM120 Appliance 9.402-7 (listen)
Same Problem, Site-to-Site IPSec works with 9.355-1 and is broken every morning after DSL reconnect since…
The IPsec local X509 certificate needs certificate objects
Hi,
We are using Sophos SG230 UTM. We have already created an Ipsec tunnel with out HO network and Supplier network and is working perfectly. Now, we want one more tunnel between our office and another supplier network but when I try to create new IPSec…
Multiple connections between UTM's
I have 2 sites each with SG 310 UTM's running Version 9.355. I have an ipsec tunnel on one external interface connecting the devices. The tunnel is used for RDP sessions and local Internet traffic is also on this interface. Each site has a second external…
Asrato Security Gateway v7 and Windows 2012R2 RRAS
Hi there!
I'm trying to build site to site VPN using ASG v7 and Windows 2012R2 Routing and remote access
I've configured PSK Gateway on ASG and IKEv2 interface on windows. On windows I opened UDP 500,4500,1701 ports (tried opening all traffic there…