Hello all, Presently we have 5 small remote offices running REDs on Standard/Unified configs, so that everything is filtered via the UTM here at HQ. At HQ we have a PBX with approx 35 VOIP phones on it and is capable of handling another 50, easily.…

Hello, we have UTM 9 Firewall , we have a problem with RED 15, since yesterday one of RED15 cannot connect to our firewall, on saturday we installed the firmware update, after the update everything worked. we use another 3 REDs that work. here…

Hello everybody - I am new to the Sophos community and I could not find a solution to my problem in the existing posts. That might be an indication that I might be missing on something very basic. In our office we have a SG135. Two SD-RED 20 devices…

Hi Guys, Setting up a new Branch Office location that will sit about 25 Staff. I have about 100 Staff at Head Office and have an SG230 onsite for a number of years. I have a couple of smaller remote offices with 2-4 staff with a couple of RED 15's deployed…

HI All. Site 1 (rca) We have a SG Utm 330: 192.168.16.1 Site 2 (si) Connected to that is a red 50 in transparent/split : 192.168.0.253 the 2 sites are on the same domain and we manage their internet with their own local firewalls. we are only…

a deployed RED15 loses its contact to the firewall after about three hours of use. In the firewall it is then displayed as "down". A control shows that the tunnel LED of the RED is still lit. After a reboot the RED rebuilds the connection and then loses…

Hi Everyone We have UTM9 configured with two external NICs and one internal NIC. External NIC #1: Managed Internet WAN with PPTP port only open. Connected to router and behind an external IBM firewall. External NIC #2: Directly connected via IPoE…

I would like to connect a RED device out of line, so that its WAN interface is connected to the local LAN. This works and connects back to the UTM but can I then point a server at the RED WAN interface and have the RED route it out? Does anybody have…