Hello, we have UTM 9 Firewall , we have a problem with RED 15, since yesterday one of RED15 cannot connect to our firewall, on saturday we installed the firmware update, after the update everything worked. we use another 3 REDs that work. here…

Hello, we have Sophos UTM and Sophos RED15 on remote site. Last days I am facting trouble that when RED15 is turned off and started again it is connected to our UTM but can't ping on RED site and they are not able to reach the internet. We are Using Standard…

I'm having trouble with a RED device that we received the other day. I've added it to the FW like any other of the REDs that we have and configured it the same way they are configured. However below is the sequence of events that happens every 50 seconds…

How to monitor SOPHOS RED on Nagios core 4.1, we have UTM SG230.

Hi We have a red device we want to setup on a foreign network in order to allow access to ours. In order to understand the configuration and how to securely connect i have been trying to get it working at my home. I have been following the information…

Hello Community, I have 2 sites that each have a pair of UTM's. One is our main site, the other is DR. We will use BGP to swing the external IP's, but I need to get the configuration, and remote networks for my RED devices on the DR firewall. …

a deployed RED15 loses its contact to the firewall after about three hours of use. In the firewall it is then displayed as "down". A control shows that the tunnel LED of the RED is still lit. After a reboot the RED rebuilds the connection and then loses…

Hi All, I'm having a weird problem with my AP, current IP address is 192.168.250.70, and can see AP in the UTM. I have an SSID called Employee with WPA2 Enterprise with a Radius in my Server Vlan. It seems the authenicate ok however when trying…

Right now my company just moved to a new UTM and we upgraded a few REDs to the RED15rev1. I read in the documentation that you needed to allow UDP3410 so it can communicate properly. Would we need just create a service definition for this port and allow…

Hi there We use an UTM SG120 @9.355 and a RED15. One of the ethernet ports ist configured as a trunk port with various VLANs. Is it possible, one of these existing VLANs bridge to the RED? Concrete: VLAN 500 @eth3 with subnet 172.16.10.1/24 should…