Sophos RED15 not booting properly, System light is on, Router is blinking - somtimes it comes on and then no internet connection is possible and the red is restarting.(i can see the lease on the DHCP server but RED ist never pingable) DHCP in the network…

Anbei der Logfiel, ich drehe noch durch 2016:01:14-23:48:23 utm red2ctl[21642]: Overflow happened on reds1:0 2016:01:14-23:48:23 utm red2ctl[21642]: Missing keepalive from reds1:0, disabling peer 79.199.30.122 2016:01:14-23:48:23 utm red_server…

Hi, My setup is below: UTM 9.351-3 RED15 in location in Transparent / Split, set to DHCP in the main office when the Internet drop for a seconds then we can't connect to the RED device anymore. it has to be rebooted. Is there any way to fix…

The case is this: A customer has just WLAN in his homeoffice and would like to connect the RED-box with WLAN to his Router, which is located at another room. Is that somehow possible? It's clear that he should have a stable WIFI-connection. It's…

I would like to connect a RED device out of line, so that its WAN interface is connected to the local LAN. This works and connects back to the UTM but can I then point a server at the RED WAN interface and have the RED route it out? Does anybody have…

I've got a camera system in a remote location and require to monitor it using the remote location IP rather than the traffic traveling back through the RED to the UTM. It still needs to be a UTM managed ip address so therefor the standard mode. Are we…

Hi, i have little problem in reconfiguring our RED15 device. It is the first RED device we have. I configured it for testing purposes for my home network. At home i have no DHCP Server, so i configured a static ip like (192.168.179.20/24) and used…

hi, I followed administration guide 9.351 to set up RED15. So I configured RED device in a transparent/split mode and I see on RED device all led are green. device connected to RED15 is getting ip over dhcp from router, however I can't ping or connect…

Hi there, I use Sophos UTM and I would like to deploy a box to all my customers and be able to manage that box over https and ssh, but device will be also connected to the customer switch to get ip via dhcp. So I was thinking that RED in transparent…

Our recent PCI Compliance scan came back failed because the RED service uses RC4-SHA. This is also one of the issues that the scanning company (Trustwave, who is used by our credit card processor, FirstData) will not allow to be overridden. If this is…

hi, I want to manage one server in remote location. I do not want to manage a whole network. I have utm and red 15. Is it possible to do it? If I plug in a wan link on red to switch and then server to lan on red then will that work?

Hi, ich have a very strange problem with the new RED 15. Setting: UTM 9.350-12 at the main office RED 15 with static IP behind an LTE-router at the remote location After the first configuration everything works fine. But after some hours the…