After I set up a RED20, I plugged an AP into it, as I wanted to have an AP behind the RED20. I have it in Split-Tunnel Mode. The issue I had was that the AP would not show up in the list of new APs to authorize, on the UTM side. I read many many posts…

Hi, one of our customers has the problem, that without RED tunnel comp. it is not possible to do ICMP larger than 1380bytes. When i activate compression the ICMP goes through - even with 9000bytes. i double checked everything, also went through…

Hello everyone, I just added a RED10 to our UTM9 and chose Standard/Unified mode as we need the remote office to be working via the local office's public IP address. However, the remote office's clients shall not be able to access devices such as…

Hello everybody, We have two branch offices that connect to our company network through RED 10 devices. Recently, one of these two has started experiencing problems where the tunnel will fail every couple of hours. Note that only of the offices…