We are adding 2 WAN connections next week I have reviewed as much documentation as I can but I cannot determine the best and correct configuration to achieve this. both new WAN lines are working 1st mainline microwave and the 2nd fiber we want to creat…

We are adding 2 WAN connections next week I have reviewed as much documentation as I can but I cannot determine the best and correct configuration to achieve this. both new WAN lines are working 1st mainline microwave and the 2nd fiber we want to creat…

Hello Everyone, a customer of ours asked us a question about giving a Power-User a seperate DSL-Line with a static IP-Address for his home-office. So here is my question: Is it possible to give one single user an ssl-vpn profile that connects…

I have been reading through Rulz and this earlier post trying to get my blackhole/null route working with DNAT since my firewall rules were not (as explained by Rulz). From the latter link, BAlfson said the following is a valid DNAT configuration: …

I setup a DMZ on a separate physical interface on a SG330; however, I can still ping hosts on all our internal networks. The only way for me to get this to stop is to disable both "Global ICMP Settings" and "Traceroute Settings" under the Network Protection…

Hello all! O would aprecciate some help from the comunity concerning UTM 9 for home. My setup at home is a ISP internet line with 14MB download and 1MB upload, we have a couple of computers where the kids play, a Apple TV for media streming like netflix…

Hi all, since a few days I have a problem with unwanted traffic originating at the external interface of my UTM. It's destination addresses are from 17.0.0.0/8 (Apple?), the traffic seems to be HTTP (port 80), the application is classified as "doof…

We have a Sophos UTM SG 125. We have two WAN links, our main one through our ISP and a 4G modem link setup in an active / standby configuration. (Uplink Balancing and Uplink Monitoring) When our main ISP connection fails, it fails over to the 4G cell…

Hi Guys, I have a small issue regarding Providing to One Specific Host Internet Access for Temporary Time. I Have One Production Vlan which doesn't have have Internet access. For a short time I need to Provide the Internet access to One Particular Host…

I am new to this and just finding my way around setting up utm/firewalls i have a 2 firewall setup an internal sophos utm 9 ffirewall and an external firewall The internal firewall sophos utm 9 is setup where all computers and mobile devices are behind…

I have published several RDP targets through my UTMs over the years, but this particular one seems to have me stumped. So, here is my layout. Internet -->Router (Subnet 1)-->UTM--(Subnet 2) Subnet 1 houses all of my General use items (WiFi TVs, Game…

Hi, We have SG310 with latest updates installed. we have 5 public IP's from our ISP"X" and another 5 from ISP"Y", what i want to have is: Our production network (eth0) will get out through (eth1) ISP"X" with a public IP(1) Our Mail Exchange server…

UTM 9.3 Software version Onboard NIC - WAN Dual NIC Card - Internal Networks. I have just set up and activated the second internal network. I want to keep the two segmented and understood this was by default. However, when I tracert a device on network…

Hi Have been trying to get some of our DMZ servers to work with the UTM for services etc WEB proxy NTP with no luck UTM has .. Internal interface External Interface DMZ interface and all sit behind a Juniper DMZ hosts have access to Internal…