Hey everyone, i have a problem here which turns out to be my final boss. What am I planning to do? I run two Sophos UTM firewalls at home, a UTM 320 which manages the LAN and an SG115 which manages the WLAN. I switched to VLAN operation, before…

Hello, I was using Cyberoam since 2013, There is feature in Cyberoam named "Virtual Host" for map public IP to local IP. I was using this for FTP server. But i can't find this option in Sophos. (XGS 2100)

Hello, My IT service puchase some SOPHOS APX 320 X. I have Sophos UTM SG 410 with 9.713-19 firmware version. I have read that those AP will only work witch Sophos Central (in french on the capture) Source : partnernews.sophos.com/.../ But…

Apologies if this topic is covered here elsewhere. A quick search did not find a solution. We have the following equipment: Endpoint LAN: 10.0.0.40 GW: 10.0.0.1 Sophos UTM LAN (eth0): 10.0.0.1 /24 WAN (eth1): 100.100.100.2 Private…

Hi, Can I Ask How to connect 2 LANS so they can see each other? LAN1 - 192.168.0.1 LAN2 - 192.168.40.1 I can ping 192.168.40.1 but I can't see the computers connected to the LAN2 network.

Hello, I decided to leg go the configured network for AP sau WiFi in order to use the IP's to the new internal VPN server and have them routed throught Sophos UTM. Right now i have: Interfaces: AP-WiFi on eth0 [10.0.0.1/24] HUM-WiFi on wlan1…

Hi, the SOPHOS UTM Firewall of one of our Clients sporadically reports an ATP-Threat (Botnet/command-and-control traffic) that has been blocked. The "infected" Hosts are always the two Domain Controllers / DNS Servers within the network. User…

Hello, I've seen a couple of message about this error, with no real answer or solution. It is quite surprising can it is really concerning regarding BGP usage and management. So basically here is a setup Router A tries to advertise networks D…

Whenever i launch my client, the software goes straight to "connecting" without prompting me to enter any details. No matter what i try to kill the connection the client continuously launches in that state meaning i can not enter any details to sign in…

in which place of astaro SG310 can I define that when they enter http://test.intranet/ url it points to the ip 192.168.1.10 like and intranet routing

I am trying to configure VLANs for my WiFi and I am having problems and I am not sure if its the WiFi system, the HP switch or the Sophos SG135w UTM 9. I currently have 6 AP's to cover the whole site, 3 x UniFi AP and 3 x UniFi AP-Pro they end up in…

Hello, I came across this thread https://community.sophos.com/products/unified-threat-management/f/management-networking-logging-and-reporting/32566/solved-dns-best-practice#pi2353=2 , and tried to adapt my config like you recommend, but i have some…

To whom it may concern, I have been fighting with DHCPv6 addresses in an UTM2UTM network for quite some time now. DHCPv6 relay works great in the datacenter locations, but never worked in the remote sites. I finally figured out why. The UTM uses the…

Hello, i have been trying to isolate two networks. Internal=192.168.0.0/24 Public=192.168.99.0/24 I have external DHCP server on 192.168.0.2 There are two scopes for those networks,which are combined into superscope (from what i understood VLAN…

Hallo Zusammen, gibt es eine Möglichkeit Anfragen an die Firewall (ping oder DNS) im Firewall Log zu sehen? Beides ist möglich aber ich sehe nichts im Log. Sobald ich Anfragen nutze (z.b. Port 23) sehe ich diesen. Viele Grüße Jiyon

Hi everyone, I know there are threads addressing Chromecast issues, but I have tried all of the suggestions in those threads and can't seem to get mine working with the UTM. My HP printer, cell phone, and Mac Book all pick up wifi just fine, but Chromecast…

Hi, I set up a SSL VPN according to this guide: https://www.sophos.com/en-us/medialibrary/PDFs/documentation/utm90_Remote_Access_Via_SSL_geng.pdf I can connect to the network just fine, but I don't see anything or can ping the pcs or servers. Ipconfig…

I have set up UTM 9.506-2 on Hyper V, WIN Server 2016. I have set up the machine and can connect to the admin interface via internal LAN. However, External WAN connection on UTM will not pick up an IP address from the cable modem. The WIN server will…

He utilize Cacti server for network bandwidth monitoring and packet loss so we can have historical information for our clients. Please hella good when dealing with ISPs and packet loss. :) We come from a Mikrotik world but one of our clients use a SG135…

Hello, My restd version is 1.2.1 on UTM 9.505004. I can make a new network definition using API, but I can't find API way to make this network definition a member of existing network group definition. Any ideas? Regards, Jan

I have got 2 sites connected via L2 Point to Point. Site A which the SIP Server, and other VOIP Call server resources are located Site B which all the IP Phones and Clients are located i am unable to do static routing on the bridge interface. The…

Hi, This is an odd networking scenario, so bare with me - TL;DR - How do I get both networks accessible through the UTM? I have 2 internet connections - one with a block of static IP's behind the UTM 220 for servers, one with a DHCP IP that is a gig…

Hi guys, I just wanna ask help or any suggestions how can I blocked entirely "Unclassified Applications" that eat most of my bandwidth? See reports below: Any recommendations will be much appreciated. Thank you. Regards, Anthony

Hello, I'm unsure if this is the right group to report this, but feel free to move the message to most appropriate one. I have just upgraded to version 9.408-4 and I have a big problem with one of my network interfaces, which they're all virtual …

Is there a way to investigate the VPN disconnect between Astaro SG210 and SonicWall TZ105? The logs indicate VPN connection established; but did not notice VPN disconnect or WAN port disconnect.