I have a Sophos UTM9 cluster where each firewall is connected to two different ISPs (let’s call them WAN1 for Provider A and WAN2 for Provider B). Let’s name the interfaces 1-2 (node 1) and 3-4 (node 2). I want that: 1) the traffic to failover from…

Hey everyone, i have a problem here which turns out to be my final boss. What am I planning to do? I run two Sophos UTM firewalls at home, a UTM 320 which manages the LAN and an SG115 which manages the WLAN. I switched to VLAN operation, before…

Hi We have a datalink L2, to communicate site A and Site B. On the Sophos site (site A), we receive the ip automatically, and can ping to gateway. On the site B, we have a unifi UTM (unifi UDM pro), we already make the firewall rule to able communicate…

Hello, We have debugging mode turned on, but unsure how to disable it in sophos UTM 9 SG310 firewall. Due to which the confd-debug keep filling up the disk. How can we diable it? Thanks for the help, Jesse.

hai class C network is possible to configure in a single ethernet port of SG230 firewall with speed of 1 Gb with DLMS/COSEM protocol

Hello Team, I have tried to use the packet Filter option with multiple combination like IP address, Port, protocol but it doesn't filter/display any result. Can I have some information regarding how exactly it is working and can I have some example…

Hello, i have actual the configuration, that my media server (Win 10 with 1 Gigabit Interface) on eth 3 is in the DMZ with Network 172.16.0.0 /16. The Media Server connect directly to Internet via OpenVPN. From Internal LAN I can connect via RDP and…

Hi, I'm struggling to find the reason why a single device (iPhone 5S) cannot resolve DNS when all other devices on the (home) LAN can. Background Running UTM 9.510-5 The pre-existing LAN has some 14 devices (NAS, Windows 10, AppleTV, iPad, iPhone…

Hallo Zusammen, gibt es eine Möglichkeit Anfragen an die Firewall (ping oder DNS) im Firewall Log zu sehen? Beides ist möglich aber ich sehe nichts im Log. Sobald ich Anfragen nutze (z.b. Port 23) sehe ich diesen. Viele Grüße Jiyon

I have my Cisco switch with all my vlans configured and routing working. Now I plan to add a Sophos utm firewall, and will use its ip as the next hop on the Cisco. my question is, with this setup, can the firewall rules on the utm have any affect on…

Hi everyone, I know there are threads addressing Chromecast issues, but I have tried all of the suggestions in those threads and can't seem to get mine working with the UTM. My HP printer, cell phone, and Mac Book all pick up wifi just fine, but Chromecast…

Hi, We currently have a SSL-VPN profile for remote access with predefined certificates from Sophos.But I dont understand the way the certificates work in them. Is it possible to generate different security certificate for different VPN profile? …

Hi All, I am very new to networking and also to Sophos UTM. I just installed Sophos yesterday and everything else seems to be working fine except Logging and Reporting --> Web protection shows traffic generated by just one user. Here is my setup: …

He utilize Cacti server for network bandwidth monitoring and packet loss so we can have historical information for our clients. Please hella good when dealing with ISPs and packet loss. :) We come from a Mikrotik world but one of our clients use a SG135…

Hi, I have the following problem I have a side (with a dynamic WAN ip) of which I want to route all traffic to an open VPN server. I want to connect a UTM 9.5 as a client to that server. And I need a kill switch aka fw rule that makes sure that if the…

Guten Tag zusammen, ich muss leider etwas ausholen, damit der Sachverhalt verständlich wird: Gegeben ist eine UTM9 mit Firmware 9.506-2, 4x VDSL Uplink (statische IPs + Load-Balancing) und 1x Fritzbox mit externem SIP-Trunk. Konkret passiert folgendes…

Hey everyone, I thoroughly followed the guide https://www.sophos.com/en-us/medialibrary/PDFs/documentation/utm90_Remote_Access_Via_L2TP_geng.pdf with my test setup of a SOPHOS UTM 9 essentials firewall edition. I managed to get my client connecting…

Hi everybody, I want to have a WIF in my sophos xg 115 without access to any other network in it. I created a "separate zone" wifi and added it to local Access point. After that, i created a new dhcp for this wifi. After all, i have a functional…

Here is our current setup. Sophos UTM at the Gateway. A Dell PowerConnect 2824 managed switch, VMWARE esxi 6.0 running our virtual servers. Our accounting software has been locking up and I was advised by them to add them to their own vlan that network…

I have two servers which I have been running UTM 9.3xx on using software version. Both are the same hardware type and brands with 3 nics. I recently loaded UTM 9.356 on one and tried a restore. The restore went through as normal but only setup ONE nic…

Hello together! I recently got asked by a customer what the addition "(on wlanX)" behind the wireless networks name means. I think, that this is a virtual interface which is created after adding a new wireless network. But I really have no clue where…

Hi all, this is my first time on the forums so be patient. I am currently investigating the "Server Load Balancing" feature on UTM 9.4. From what I understand when configuring the Virtual Server you need to specify an IP address on an interface. Let…

Hi folks, there was a question in in the German part of this forum regarding the accessibility between two VLANs, which are configured on the UTM. Therefore I scanned my privat network (VLAN1) from a host (192.168.20.12) in my guest network (VLAN2)…

I have a Sophos UTM setup as router/firewall. It is wired to a switch which then runs to various devices one of which is a TP-Link Archer C7 (being used as wireless AP, assigned internal IP of 192.168.10.3). I'm relatively new to Sophos, but I have…

Is there a way to investigate the VPN disconnect between Astaro SG210 and SonicWall TZ105? The logs indicate VPN connection established; but did not notice VPN disconnect or WAN port disconnect.