Hi, my Sophos UTM 9.5 Home Edition hangs sometimes at the boot process. It happens at a reboot as well as when the UTM was completly powered off and on again. It hangs at the splash screen ("Press F2 for details"). When I press F2, I can see the following…

I have a sg310 with 1 copper 1000 connection and 2 10G fiber connections to the main swith they are link Aggregation to the switch with LACP enable on those 3 ports in the switch. when I reboot the firewall, the 2 10G ports wont connect to the switch…

Bottom line up front : I was able to get around the installer hanging at 66% on the "Hardware Detection" screen by doing the following: Press [Alt] + [F2] to bring up the console window. At the command prompt type cd /usr/lib and press [Enter] …

Hi, I have a problem with my UTM 9.403-4 (now) since about three months. When I reboot the UTM it hangs and shows "Sophos UTM - Press F2 for details" on the screen often. The UTM doesn't recognize any keypress or power-off button in this state. I have…

Hi all, I am new here and wanted to share my experience installing Sophos on my custom build PC. I have the following hardware: ASRock Z170M-ITX/ac i5-6400 8GB Memory 120GB 850 EVO And this all is put in a LC Power 1400MI case. The machine…