Hey all, i had a weird bug while installing 9.7.19-3.1 and asg-9.718-5.1 on my home Firewall (UTM 110/120). I tied to install these versions multiple times but i still got this BUG after the Installation was finished: *BUG at task_install.c:1005*. My…

System: Sophos UTM 9.719-3 Dear Sophos Community We are using the Lets Encrypt bot for a certificate that is used by two different virtual web servers. For this bot, we can only select one external interface. We have two external interfaces for high availability…

Hello, After a reboot of a HA node, it doesn't start anymore and blocks on the "Sophos Protection" display. When I connect an HDMI cable, I get the message: "Reboot and select propoer boot device or insert boot media in selected boot device and press…

Hello everyone, Last night I got my SG135 Rev3. per schedule on 9.716-2 update. According to the e-mail notification, the update was also made, but since then the firewall has unfortunately no longer worked. The status LED flashes green continuously…

Hello folks, we're currently still using very old Dell PowerEdge R310 nodes and Sophos UTM 9.7 (latest) as a SW Appliance in an Active/Passive Cluster. Each node has 6 NICs whereas 2 use LACP for WAN and 2 more w. Active/Backung Bond on LAN and the…

If the latest software ISO available for download is 9.713, is there a way to update it to 9.714, using the Up2date files, before using the ISO to reinstall? I believe this is called slipstreaming when referring to Windows installation media. The backup…

Thought I'd get a spiffy new Ryzen7 embedded board with 4x2.5Gb Intel ports. (CW56-58 5800U) After futz'n around for a bit, I still haven't been able to boot the UTM9 installer. https://support.sophos.com/support/s/article/KB-000034600?language=en_US…

Hello, we are currently using two SOPHOS SG330 as a firewall in our datacenter and we have connected our offices via RED15. Now we are forced to switch into another datacenter, but the current SOPHOS infrastructure may be obsolete in this scenario,…

Hallo Leute, ich habe eine Gebrauchte SG 230 bekommen und wollte die Home Lizenz einspielen aber dann kommt das: und bei myutm wenn ich einen neuen Schlüssel erstellen will kommt diese Frage: Ich habe jetzt schon den Herrn von dem ich…

I have an utm appliance that I want to use to segregate part of my internal network. The problem I have discovered is that with the license being expired I cannot create / edit time definitions. I don’t understand why as time definition is not listed…

Hi, I have two SG210 with UTM 9.709-3 installed. One is at the headquarter and the other at the branch. At the headquarter I set up IPsec with remote-net 192.168.11.0/24 and branch 192.168.12.0/24. VPN-Pool (IPsec) uses 10.242.4.0/24. The headquarter…

Hello, My UTM Home Use License has been expired and went to myutm to create a new one, but when I tried to install it I got the error message shown in the screenshot, can anyone help, please.

I'm playing around with Sophos for home use, but having issues with my VM hosting sophos. I was able to pick up a UTM 220 cheap, and wanted to migrate to that, allowing me to deal with my VM without losing my UTM. However... I must be missing something…

Installing Sophos Home Edition UTM on a Lanner 7541C-E01/A firewall appliance I bought mine on eBay for $70 with $13 shipping. www.ebay.com/.../114305668920 1. PREPARATION Make sure you have a SERIAL cable to connect your laptop/desktop to the RJ45…

hello my friend is trying to get free trial of sohos utm but he canot if he apllied to sophos xg trial he gets does sophos stopped giving utm free trials?

The sasi downloads the /var/pattern/sasi/asdb.antispam every 30 seconds and is unable to load/verify it. It generates 800GB/week. I have noticed it since a few months. Error in var log is given below: /var/log/sasi.log 2021-08-21.00:04:27 MESSAGE [9999…

Has anyone install UTM Software on a Dell R240? Can't seem to get past 3.6sec of boot during pci setup. Using asg-9.705-3 iso. I'm an old school server guy and this thing has got all this enterprise management who-ha and graphic bios setup. Lifecycle…

Hello everybody I have a Sophos UTM220 at home. Now I want to put it into operation. The only option is with the home license. However, when I want to upload the license there is always an error ..., Does anyone know what I have to do? Many T…

Greetings to all! We've recently received our new SG330 boxes, and are planning to replace our current HA SG310 cluster. What is the easiest method of swapping out these devices and retaining the current configuration? I'm sure this has been asked…

Hi, After I've tried to update the UTM HA Cluster from 9.702-1 to 9.703-3 one node is in DEAD Status. (both models are SG230) I've already re-image it with version 9.607-2 and now I have one node with 9.702-1 and another node with 9.607-2 and I…

Hello, currently we have two SG330 nodes running in a high availability cluster. (active-passive) In one or two months we want to replace this nodes against two SG450. I have considered the following two replacement procedures: ******** Procedure…

Hello, updates down't work on our Sophos UTM Software Version 9.702-1 looks like der is a missing link for update directory? Thank you! 2021:03:16-10:59:29 astaro2-1 audld[10116]: running on HA master system or cluster node …

I am attempting to install the latest version of UTM 9 on a Windows 10 machine using Hyper-V Manager to practice configuration. I do not want to make changes to our production hardware at the current moment. After installing and the UTM is running, I…

Hi, I'm trying to create a active/passive HA-pair running 9.705-3 on 2 hyper-v 2019 hosts. I've enabled MAC spoofing on the NIC's. One UTM is configured in HA Active/Passive, the other is on 'automatic configuration'. I can't get this to work. In…

SG450 UTM shows RAID status as degraded. Is there a way to check the status via CLI? what i found so far is: ictrz-fw-01:/home/login # lsblk NAME MAJ:MIN RM SIZE RO MOUNTPOINT sda 8:0 0 223.6G 0 ├─md0 9:0 0 223.6G 0 │ ├─md0p1 259:0 0 350M…