Successful UTM install with HDMI, fix for stall at 66% on Hardware Detection
Bottom line up front : I was able to get around the installer hanging at 66% on the "Hardware Detection" screen by doing the following:
Press [Alt] + [F2] to bring up the console window.
At the command prompt type cd /usr/lib and press [Enter] …
RE: Log Disk is filling up <Solved?>
I am currently having same issue. However, I don't seem to have proper permissions as roob to rebuild or access some locations. Please advise.
RE: Log Disk is filling up <Solved?>
Uh, guys...is this still valid? Seems I am missing something. I have a postgresql92 available, and tried this postgresql92 rebuild and then prompted for password which is not root password.
The data is filling up even after clearing logs, which I understand…
RE: Disable bad bugfix in 9.405-5 "Fix [NUTM-2840]: [AWS] UTM ignores MTU sent by DHCP server"
THANK YOU, I too have been fighting with strange issues the last couple weeks. Glad I decided to look here.
I made the fix and was able to set the MTU to 15000 and all is back to normal.
HA: Cannot initialize Active/Passive
Hello folks
I encountered a strange situation which I cannot resolve using backup/restore and/or clean re-install.
The Setup
I have a 2 node virtualized setup like in the attached simplified image. I'm using the home edition of Sophos UTM 9.405…
RE: Disable bad bugfix in 9.405-5 "Fix [NUTM-2840]: [AWS] UTM ignores MTU sent by DHCP server"
Thank you very much VegardOestengen! We have spent the last 24 hours trying to figure out why after the 9.405-5 update, users were unable to access their network shares on their NAS (QNAP). (They connect via an IPSEC site-to-site VPN). We tried quite…
Sohpos UTM9 SG230 doesn`t up2date
Hey everyone,
I have got 2 Sophos UTM9 SG230.
Made a backup to a USB-stick and are trying to get the backup to restore on the other sophos.
But the problem is that 1 sophos has a higher version 9.4
while the other sophos is running at 9.3. …
RE: Up2Date 9.405005 available
PaulHolt said:
I'm using a Broadcom dual NIC card. My External MTU is 576 and I can't change it to 1500 either, keeps reverting back to 576 after the save. My UTM was working fine until this update.
I have the same.
Upgraded to 9.405-5, and…