Hi,
Can anyone advise me as to why I cannot select the UTM's DHCP to assign addresses? I know there is probably some reason? But I have read through so many post, but none have answered this directly.
Regards D
Hi there, Very new to Sophos, have been trying to setup Sophos UTM with a Virgin Media Router (hitron business hub) in modem mode, coming from using Untangle. Running the setup wizard see's both NICs on a Dell Optiplex 980, internal lan configures fine…
I am currently having issues with my wireless clients receiving a dhcp lease. They will sometimes work, and other times not. Wired clients have no issue.
Setup
Sophos UTM running firmware 9.509-3
WAP: Ubiquiti AP Lite running firmware 3.9.27.8537…
Hello,
I loaded Sophos UTM Home VirtualBox. I tried to access the webadmin interface at https://192.168.1.200:4444 - but Firefox says:
Secure Connection Failed The connection to 192.168.1.200:4444 was interrupted while the page was loading. The…
Explaining what happened to me. Internal Network was configured with two physical NIC's in bridge mode, to extend the topology. Worked fine until one of the NIC failed. But the worst thing was after the reboot, any configuration about Internal Network…
Hello,
I am running UTM version 9.509-3 which supports reverse proxy. Also, I do not wish to change to XG as I have tried it and i really don't like it. It feels to me overcomplicated for no obvious reason.
So I would like to achieve the following…
Hi all,
since yesterday I have an issue with my Sophos UTM 9.509-3 Home Edition. I've running it as virtual machines on free ESXi 6.5 in HA mode, distributed on two host systems with the preferred master on node 1.
Hourly there are the following messages…
Hi,
I'm looking at integrating UTM 9 into my network. My intention is to use it as a L7 firewall with IPS and a reverse proxy so I can present several IoT devices to the Internet. I may use it for VPN too.
Currently, I have:
Cisco C897VAW router…
Hi to all
I am in process of redesign of my home network to adding UTM to équation.
All device are managed with 10gbe (fiber) or 1gbe connection (RJ45) I'm connected with FFTH, bandwidth is 100 Mbps upload/download, but it can be possible to upgrade…
Basically, i installed Sophos UTM Home onto my UTM220, and followed the basic setup, however after this when i added extra Ethernet interfaces in "interfaces" they wouldn't work. To be honest i dont understand how to setup the firewall, and i need help…
I've been using a small UTM appliance for a few years for my small business and installed a home version for the house a year or two ago. Both have worked nicely with very few issues.
As of yesterday, my home UTM is acting up and is pegged at 100…
Hey guys,
I have setup a new authoritative name server for my domain.
What do I need to setup on UTM for this server to be able to server external dns requests?
I added this NAT rule
Do I need to do anything else?
Seems like DNS server…
Hello guys,
I´m planning add my own name server for my domain. Just for testing in my lab. Is there any option to protect this server which will be opened to the Internet with Sophos UTM?
I´m using IPS and name server will be in DMZ but is there any…
Hi,
I have configured a few subnets in my utm.
In my "internal" subnet (192.168.2.0/24) a chromecast is connected. How do I need to configure my utm, that clients from the second subnet (192.168.221.0/24) can connect to the Chromecast?
Any ideas…
Morning All, I'm begging for your help should anyone know, I've been working on this for 24 hours now and am using a PFsense VM just to get by.
I have a very loaded UTM (full of config for websites, SMTP rules, web rules etc) about a years worth…
Hi All,
This is more of a, "Hey, look what I found", in hopes it may help others looking at the same problem and need a workaround.
This all started when I could not stream video from my Zoneminder (ZM) server when connected to my network through…
When connected through UTM 9, my iOS devices are not able to send or receive mail with multiple providers (EG: Yahoo, Gmail and 50webs hosting).
When on LTE network, everything works as expected.
What do I need to do to fix this problem?
Thanks…
Hello
Completley new here aswell as my knowledge of sophos UTM 9 SG!
Unable to download programs such as some drivers but mainly programs. Log file is full of it
I am using the Home Edition NFA SG UTM 9.
Did some research about my problem…
Hi!!
Newbie Here. (although I am an Electrical Engineer in VOIP etc)
I had read somewhere about mis-labeling of Ethernet ports on QOTOM. Does this affect the 1904>
Also, is there a BIOS command I must do in order to load Sophos from a USB…
Hi All,
I am a happy user of sophos UTM now for 3 years.
I now have to block IDM (Internet Download Manager) usage on my network. it has a lot of impact on the bandwidth usage.
How could I achieve this with Sophos? is this possible?
i've already…
Greetings,
I'm running UTM 9 Home. Generally speaking I have no issues getting to websites, I'm running in Transparent mode and do not proxy HTTPS. Wells Fargo used to work fine, but in the past few months (maybe longer) it has become increasingly difficult…
Hello guys,
I´d like to setup SSH access with SSH key to my Sophos UTM (Home Lab)
I´ve generated SSH 2 RSA 2048 key and pasted it´s public part into Authorized keys for root.
After I click apply I´m getting this error :/
What am I doing wrong…
Hello everyone,
i have a question with hot to get my Serial LCD display in my old Smoothwall (caswell) utm box and was wondering how to get it to work as all the other guides require the version 8 Utm iso.
so my question is can this be done without…
Hi there!
I am using Sophos Home UTM for a while, but i have one question.. normally i had no trouble with licensing, but since i also give IPv6 addresses, i'm running out of the 50IP free home license usage... sometimes a client connect with IPv4,…
I have a working instance of Algo VPN, configured with default settings, set up on a cloud service - confirmed to work because individual clients can access it. I would like to set up my Sophos UTM to direct all traffic over it so every device on the…