I have the need to change an incomming stream request to an different streaming server with different name name and on different port. For example: Request to www.test.com:8144/abc.mpeg www.test.com:8044/def.mp3 Is this possible and how? I tried…

Hello, I have two WAN connections. Now I want to the service Port 51413 to use ONLY WAN2 and whole internal network LAN from WAN1. How Can I do this? I repeat when WAN 2 is down I don't want Port 51413 connect through WAN 1.

I’m documenting my numerous issues with SOPHOS Firewalls so that others can be aware of what they are getting themselves into. Episode 1 community.sophos.com/.../sophos-purposefully-designs-bugs-into-their-firewalls-episode-1---vpn-failover-and…

I have a SG135 with UTM Home and a Fritzbox 6591. My Network is a followed: ETH0: WAN with IP 172.10.0.2 (Fritzbox 172.10.0.1 / Additional IP 192.168.3.1 with DHCP on UTM for WLAN over Fritzbox) ETH1-7: internal Network with 192.168.4.1 and DHCP Pi…

Hi, I am deploying a Sophos Firewalls + RED devices at a customer place. The customer has P2P RF Links and Broadband connectivity and the current setup looks with something like follows: 15 location: Broadband Only - Deployed RED-60 devices 10…

Our network will consist of 5 access switches connected to a layer 3 core switch connected to a SG430. We will have several VLANS consisting of computers, VoIP phones, security cameras and card access readers. Total users will be around 100. We are fully…

The setup is a layer 2 switch with 2 vlans, Management (172.20.20.0/24) and Data (192.168.100.0/24). The vlans are separate port groups. The switch has a physical connection for each vlan connected to 2 interfaces on the UTM. The UTM is the default gateway…

When I wrote the belowed static route, it is not shown in the route tables and it also doesn't work, any idea why?

Hi guys, yesterday I installed a nice system consisting of a SG210 and 6 outdoor sites with RED60 at a customer. So far everything is great and I am very satisfied. For reasons of web filtering / IDS / antivirus / firewalling, etc., the REDs run according…

Not sure at what point this started happening, but users reported slow down with remote desktop sessions when a large burst of traffic from other vlans is being forwarded on other networks. The problem interface is Eth0 where we have vlans feeding into…

Dears, I have a sophos SG 330 firewall I'm trying to reach a new test cloud subnet from my internal network, a static route has been configured also on the core switch before starting to work on the SG box I have performed the below configuration…

Hi All - I have an issue that I'm hoping will be simple. I have 2 VLANs and I'm able to ping and view devices on the 2nd VLAN without specifically allowing the traffic with a firewall rule. How is this possible? If I run a trace route from the first…

Edit: Don't think this is possible with the limited ospf functionality of UTM. BGP most likely will be the answer.

Here is my setup: Home Network (192.168.0.0/24) ——> Router(192.168.0.1) ——> Internet Windows 10 Host running Vmware workstation Sophos UTM is installed successfully in Vmware workstation with two NIC’s NIC 1 = Connected to Bridge network in vmware…

I decided to complicate my life (further) by switching my home-office/lab from a workgroup to a domain environment. I have both local and remote web servers and email servers. The Sophos UTM is currently acting as my DNS and DHCP servers. I am also using…

Nth

Hi Everybody, i want to connect two Sophos UTM-Cluster ("DMZ-UTM-1" & "DMZ-UMT-2") via OSPF to an external Partner. Reason is that i want to connect two local Servers "SRV-1" & "SRV-2" with 2 external Servers ("EXT-SRV-1" & "ESX-SRV-2") with full redundancy…

Hello, I saw already the DNS Best Practice Article and UTM Help Section, but still have questions how to change my DNS Server correctly. At the moment I use the utm as dns server, and I have already created all my internal devices as host objects with…

So I’ve been trying to figure this out and i really am struggling and I have rang sophos a few times and well been met with a quick dead tone of the phone :/ so we have our main switch which is HP 5400zl series switch and our utm and then from utm…

In under a 24 period I have a logfile that fills up with this message: 2021:02:18-09:51:17 ast-thr-utm-001 httpproxy[16699]: id="0001" severity="info" sys="SecureWeb" sub="http" name="http access" action="pass" method="CONNECT" srcip="172.17.17.2…

Hi folks, I try to grasp how Sophos UTM handles routing and found this image on Rulz (from BALFSON): /cfs-file/__key/communityserver-discussions-components-files/51/4087.iptables-sequence.JPG Unfortunately, it doesn't tell me clearly what is the…

Hi Guys, I'm running the latest UTM 9 (version 9.705-3). I have the following configuration: LAN 1: 10.10.1.0/24 LAN 2: 10.10.2.0/24 SSL VPN Pool: 10.10.3.0/24 Everything works fine. I can log in with VPN users and they get allocated an IP address…

I'm currently using Uplink Balancing with one active WAN (WAN1) and one standby WAN (WAN-BAK) interface for failover. I have prepared a WAN2 interface (to another ISP) and would like to add it to active interfaces in order to provide a smooth transition…

Hello, I found similar topics on the forum but none on them clearly explained what the problem is. It seems Web filtering is taking priority over Policy Routes. I have the following routing problem : Network 10.10.10.0/24, which is a production…

Hello, is there anyway to setup SSL VPN without static ip, there is no option on ssl vpn configure to define the public domain name. This option available on XG and it working fine, but UTM i don't see way to setup remote access without static ip.