• WAN port with PPoE and VLAN configured won't connect without use of switch in front of it.

    Mathieu Termeer
    Mathieu Termeer
    Hi there, I have a FFTH connection from my ISP (KPN, the Netherlands), from which I get a PPoE connection with VLAN (Id 6). I am trying to set up the WAN connection on a minipc, but I won't get it done, without the use of a switch with VLAN tagged in…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Setup Question LAN/WAN VPN

    Hinze
    Hinze
    Hi ! I'm quite new to XG Firewall. I've got the following Setup: XG Softwarebased setup on 2 Lan Card PC Port 1 LAN with Range from 192.168.1... Port 2 WAN with Statik IP 192.168.3.... getting it from Router LAN Router with static IP Adress…
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • IP mapping

    mihir patel
    mihir patel
    hi sophos, I'm new to sophos i know how to set up live wan IP in sohpos XG firewall. Now from the vendor i purchase leased line he give me a live static IP . how to mapping that static IP with wan live ip. I need to start Video conferance. …
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Bandwidth usage

    SVYM IT
    SVYM IT
    Hi I wanted to know how we can check the Wan usage?
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • WAN Link Failover - Limiting Bandwidth on Backup

    dma0
    dma0
    I have a dumb question on the interaction of firewall rule settings and WAN failover rules. My particular network has three WAN links: One fibre, one cable and one LTE. The fibre and cable are both set to active, while the LTE is set as a backup which…
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • How to associate a block of Public IP addresses to a single WAN port

    Jeff Tapp
    Jeff Tapp
    Hello Sophos community. I know this is a pretty basic question, but I'm having a very difficult time finding a straight answer, and the UI isn't exactly intuitive in this case. I have configured numerous firewalls in my time as an IT guy, from numerous…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • ISP required VLAN Tag to connect

    Mark Stoker
    Mark Stoker
    Our ISP requires us to supply a VLAN TAG on the WAN connection. From other discussions I have seen that I need to create a VLAN onto the interface. This I have done and it now seems to connect ok. However I'm not sure what I need to configure for the…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • SSL VPN Listens on all Interfaces???

    Chris Schnobb
    Chris Schnobb
    Hello Everyone, Recently with the release of 17.1 I was happy to see the ability to change the SSL VPN port. I decided to take a plunge and move to XG. After a few hours of configuration and getting everything up and running I changed my SSL VPN port…
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • SSL VPN Gateway chose

    VikenNajarian
    VikenNajarian
    Hello, I'm experiencing a weird thing on the XG firewalls that I manage for my custommers. All of the XG's are configured with SSL VPN for remote users (not site-to-site, just remote access). Many of my custommers have multiple WAN connections…
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • 2 ISP WAN and DNS configure

    sindbad
    sindbad
    Hi all, I configured a second WAN today. It looks good. Now I have two ISP’s. If WAN1 goes down. WAN2 will take over. Thats what I wanted. Now I do have an external domain registrar. For example hostgator.com. I have my external IP of my WAN1 in…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Authenticated Users to be able to access internet through differnet WAN

    Yasiru Sellahewa
    Yasiru Sellahewa
    Hi, I'm new to Sophos. I have two WAN connections.. One for general purpose(WAN1) and other for business(WAN2)... I'm wondering whether if I can have the users in one WAN1 and have internet access by default... and then authenticate the users through…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Multiple IP/Subnets on single WAN physical interface

    Patrick Wille
    Patrick Wille
    Good day, We purchased a new subnet for a client of us. The default IP is like: 217.63.AAA.BBB connected to Port2 we have a subnet with the ip: 212.115.CCC.DDD/29 This ip range is routed to 217.63.AAA.BBB I wanted to add an alias to…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Multiple WAN ip subnets / addresses

    Patrick Wille
    Patrick Wille
    Good day, We purchased a new subnet for a client of us. The default IP is like: 217.63.AAA.BBB connected to Port2 we have a subnet with the ip: 212.115.CCC.DDD/29 This ip range is routed to 217.63.AAA.BBB I wanted to add an alias to…
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Webserver on public alias IP

    ICT Titlis
    ICT Titlis
    Hallo zusammen Ich hab folgendes Problem. Bei meiner Sophos XG310 (SFOS 17.0.6 MR-6) möchte ich gerne eine Webserver mit einer WAN Alias IP publik machen. Das funktioniert auch von den meisten Orten auch gut. Leider bei uns im Gästenetzwerk bekomme…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • How many WAN link available on Sophos 330

    Deepak Verma
    Deepak Verma
    Hi, I plan to buy Sophos XG330 but I have 3 ISP with the dial-up connections. I want to terminate all ISP on my firewall as active-active. Can you guide me that is it possible as tree ISP link as dialup (WAN load balancing) on active-active configuration…
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • WAN throughput

    SophosNewby
    SophosNewby
    What would I need to look at if I am experiencing our WAN throughput to be approx 1/5 of its actual throughput. I am running speed tests through the firewall and getting speeds roughly 9-17Mbps up and down, where it should be 50/50Mbps or close. I haven…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Problem with DNS when external Load Balanced change the WAN (ISP) service.

    Miguel Cruz
    Miguel Cruz
    HI, Good Day. I have a TL-ER5120 v2.0 (firmware 1.0.8 Build 20140212 Rel.36037) that gives DHCP and Internet to my Sophos XG Firewall (SFVH - C010018P2GDHJ37, firmware SFOS 17.0.3 MR-3), Im attaching some pictures. With my main router (the Tp-Link…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • WAN Gateway IP on a different Subnet

    Hasan Fakih1
    Hasan Fakih1
    Multiple VPS and online server providers these days provide you with a gateway IP that is on a different subnet than the WAN IP. On pfSense, Forefront TMG and Untangle firewalls, I can add the gateway IP even when it's on a different Subnet, but on Sophos…
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • Is it possible to forward traffic to specific interface?

    John Henry Vindas Carballo
    John Henry Vindas Carballo
    Hi, We're creating a DNAT rule to forward the traffic from a public IP that is configured as an Alias in the Port8 of our XG firewall. All the traffic that enters the Port8 will be forwarded to Port7 that have the 172.16.16.1/24 IP. As you know…
    • Answered
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • Can't ping secondary WAN link from Internet.

    John Henry Vindas Carballo
    John Henry Vindas Carballo
    Hi all, I have 2 WAN links, both are from different ISP. One of them (GW-principal) it's working flawlessly, the sencond one (GW-secundario) was the backup link for the GW-principal. We decide to change the link state from Backup to Active so we…
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • Routing WAN Traffic through Site 2 Site VPN for one device

    The_Deef
    The_Deef
    Hi Guys, maybe i am blind, but i've not found a solution for my NAT / Routing issue. I need to route / nat outgoing WAN traffic from one of my Client Servers to use the WAN IP from my UTM9, but have not found a viable solution yet. I have currently…
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • Computers are taking too long to work WAN after hibernation

    Paulo Stwart Dubovicki Vasques
    Paulo Stwart Dubovicki Vasques
    Hello! I have a XG105 with MR5 firmware (Didn't upgrade it to MR6 because I saw somewhere here in the forum saying the STAS isnt working well). The firewall rules are mixed Users and Networks. I noticed that when a computer from Network rule (by…
    • Answered
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG fails to route LAN traffic to WAN

    RichardHill
    RichardHill
    Hi All, I've had a bit of mare configuring and installing this recently - hence the plethora of questions over the past couple of days. Anyway, I've got to a new stage at the moment. My network is configured as such: DMZ 10.0.0.16/28 ^ (To…
    • Answered
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • VLAN ROUTING IMPLEMETATION

    Oluwasegun SHITTU
    Oluwasegun SHITTU
    Am a new babie in SOPHOR firewall. I have a new XG210. I want to achive multiple DMZ, WAN and LAN. I have my core switch connected to the firewall which had two vlan one Management and the second one SERVER. I want to have two ISP connection which would…
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • Traffic from LAN not redirected to WAN

    Kurosh Dabbagh
    Kurosh Dabbagh
    Hi everybody, I just instaled a sophos xg 115 firewall and i cannot Access to internet. I connected firewall's port 2 (WAN) with ip 192.168.1.2/24 to my Movistar Router (ip 192.168.1.1/24), and then i created a LAN in port 4 with ip 192.168.75…
    • Answered
    • over 7 years ago
    • Sophos Firewall
    • Discussions
  • View related content throughout Sophos Firewall
  • More
  • Cancel
<>