WAN interface keeps going down every one /two Hours or so days. It started earlier this week and I can't find a reason why it happens. Once I reboot the router, it comes back up.
Hellow I am following this configuration for failover:
https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp/Routing/Gateways/RoutingConfigureGatewayBalancing/index.html
I want to be sure if there is…
Hallo,
wir haben einen Lancom Router von der Telekom (Der aktuell nur als SIP Port für unsere alte Telefonanlage dient), der in unsere Sophos aktuell nur als WAN Gateway Backup mit Failover eingetragen ist. In der Sophos steht er mit 20.251 auf einem…
We are currently being provided a block of 5 static IP's through our Comcast Fiber EDI connection with Comcast providing us (2) ranges of IP's. We get an L3 range and a Usable range. My understanding of this is to allow easier troubleshooting of the Comcast…
In our production environment we have replaced our old firewall with a Sophos XGS 116. We have replicated the rules we had in our old firewall and everything seems to be going well: our applications are accessible, we can manage our databases... in short…
Hi
We have a fibre link from our ISP with a static IP and a secondary / extra range of public IPs.
Public IP: 100.100.100.62 (numbers made up) with GW 100.100.100.61 - This is the primary IP we use.
We also have a set of secondary public IPs on…
Dear Mate,
I've two links one is a static IP address another is a PPPoE connection, both links are ACTIVE connections, whenever a static IP link is down, the PPPoE connection is not working properly, it's very slow but that pppoe link is 400mbps line…
we have to Dual WAN with static IP- refer to below screenshot
118.189.XXX.XX is the primary WAN IP address.
165.21.XX.XX is the secondary WAN IP address.
The problem is that SSL VPN is configured with the IP address 118.189.XXX.XX (Primary WAN)…
Hello,
I have what is hopefully a simple question. My org wants to set up a remote office with redundant firewalls and ISP's to keep connectivity if one firewall fails or one ISP goes down. A colleague of mine told me that at a previous company, they…
Hi,
I have two nodes with HA going, and on primary node, I disconnect Wan port cable and hope HA will failover to my 2nd node, but it does not.
1. when I disconnect Wan cable, I do see interface on node showing red, meaning it had detected Wan…
Hi,
I have a XG home lic appliance setup in a virtual machine, and right now I have one nic for one Wan line. I want to add a new NIC so I can have a 2nd Wan line. I have two ISP lines coming in, one from AT&T, other one from Verizon.
I found out…
I started this update this morning around 10am (14 hours ago). I was running 19.0 with no issues. I have the XGS2100 with the 4x 10Gb SFP+ Flexi_port module. I have 2G fiber in my A2 (SFP+) then in Port2 (1G) I have a coax modem as my backup. A1 (10G…
Let me brief the topology, we have two WAN uplinks connected to a active -passive HA.
The issue is after initialization of HA one of the uplink status goes to RED.we are unable to use the 2nd ISP as a load balance
Designing the solution for redundant internet for a HA firewall.
The architecture I have in mind is:
Is this design complete or should I add additional items?
---
John
Hello,
I have a problem with the backup link in Sophos. We received an LTE link that works and has the correct address set. The "Type" options were set to "Backup" and the "Activate on failure of" rule was set to the main link. The problem is that when…
Added second WAN zone network port5
ipv4 192.168.101.2/27 gateway ip 192.168.101.1
SSID new network
DHCP
Firewall Rule
WAN link manager information
able to connect Tablet to Wifi and i get DCHP release result block firewall…
On top of it showing the WAN as down, its always showing 25% packet loss. WHereas if I connect my laptop directly to the ISP router, the is no packet drop.
Hi,
I need a little help. I have client that has three WAN connection. One set to Active and two Backups. How can I choose which backup connection will take over first, if the Active one, fails?
I have this option: but it let me choose only between…
I often receive the following error when trying to update a failover rule for one of my gateways:
"Gateway failover rule could not be updated"
I can't find any consistency in how to re-create this. I'm not sure if the problem also existed in v18.x…
hello,
I have one ISP I am using which is a dedicated 30/30mbps but the speed connection is really poor so I just want to use another ISP which will give me a 10/10 dedicated internet connection. So what I want to ask is that can I merge both the ISP…
The failover rule for a WAN link only allows for failover to "any available gateway." What if I want it to fail to a specific gateway, one that is active all the time?
I have 3 WAN connections--these are ALL active connections ALL the time.
Fios 1000…
I have Ports 2 and Port 4 configured as WAN, both active with weighting of 1.
Both are connected to Comcast BUT separate internet connections, one is from my house, one from next door.
It appears by Speed Testing that both are passing download traffic…
Greeting SOPHOS Comunity,
I am looking for some help configuring routing on a Sophos XG 135 SFOS 19.0.0 GA-Build317.
I don’t work on firewalls often, so I apologize if some terms are incorrect.
I did find https://community.sophos.com/utm-firewall…