Hallo,
mit einer XG 310 sind 2 RED60 und 2 RED50 über Internet verbunden. Die zwei RED60 u. eine RED50 sind mit der XG310 im Bridged-Mode. Die letzten Wochen habe ich täglich das Problem, dass das Netz hinter den beiden RED60 und der RED50 nach einer…
I'm trying to understand the best way to configure the firewall so it can see what's going on and alert me but not get in the way and avoid any changes to my network?
I have a Ubiquiti USG as the gateway device that feeds an 8 port switch. I thought…
Hello,
I need to pass a public IP from my router XGS3100 to a virtual XG firewall for legal purposes, example Port 2 is the wan 1.1.1.2, port 1 would be connecting to the Virtual XG firewall and would like it to be 1.1.1.3.
Thanks!
Hello Sophos, I am pretty new to sophos and I have one particular situation. I have a notebook directly connected to one bridge previously created but i can't reach others hosts inside bridge.. devices connected to this bridge can not establish an local…
Anyone know of a way to get OSPF working on a bridged interface (Br0) that has routing enabled? What I am seeing is it attempting to send out the general ospf multicast traffic looking for neighbors but nothing responds. I have traced this back to something…
Hello everybody,
I would like to know if it's possible to add VLAN to a Bridge port.
For example:
Bridge port = Port1, Port4 and Port8
VLAN = 20 and 30
I would like to add those VLAN to the bridge. I receive IP from each VLAN but I cannot…
Hi. So I had 2 ports bridged (Port 1, 3 and 4) to the LAN port (Sophos XG V 18.x)
I want to use Port 3 for DMZ as I need that now.....So I removed port 3 from the bridge. I still have access/ connectivity etc. via LAN so thats not an issue.
I have…
Hi All,
this is my first post and sorry for my poor english :-)
I have an XG Firewall that I configured so:
Port 1 bridged with Port3
On Port1 I connected my LAN on Port3 I connected a router (IP. 10.0.0.65)
IP on bridge are:
10.10.10.1 /…
XG105w V17MR-15
Port 3 in our firewall is free - i.e no cable connected. We would like to remove it from the default bridge on our bridge0 interface but it looks like we can only remove the bottom two. The reason we want to remove port 3 from brdige…
I fully configured an XG135 (VLANs, DHCP interfaces, etc) and realized that I neglected to bridge 2 additional ports for the default LAN (port 1). Is there any way around losing my DHCP and VLAN configurations when this bridge gets created?
Hello everyone...
I've been looking for my problems resolution for more than a week but haven't found similar situation.
I'm a new user of XG 310 with 18.0.4 firmware. I want to replace Mikrotik router which is the main part of the network with the…
I apologize if this has been explained somewhere else and please feel free to direct me to the answer.
I have a XG appliance that we want to bridge 2 interfaces and create them as a bridged trunk for VLANs.
So on the XG we have int 1 and int 2 that…
In case I use the router, configure it in bridge mode and connect to a firewall that accepts IP on the WAN as DHCP, which if the router has updated the IP but the WAN pin is still the original IP address, not exactly how to configure it. To keep the WAN…
Hi there,
I am a home user. I have a modem/router combo, behind this an asus router, which I need, due to tx/rx performance.
I had the idea to use my home sever as a (virtual) firewall, why I have virtualized a Sophos XG (latest) firewall in Hyper…
Hello,
we have set this up for a remote location:
So the same VLAN ID on both sides: behind XG and behind RED, same IP Subnet.
Bridge Members, same Zone:
This is already in production and working. the RED60 Users can work on internal ressources…
Hallo zusammen, ich würde gerne mein bestehendes Netzwerk monitoren und absichern. Dazu habe ich mir eine Astaro 110/120 gekauft, auf der Sophos UTM 9.5 läuft. Nun stellt sich mir die Frage, wie ich das Setup am besten und einfachsten realisiere. Folgende…
Hi, good day.
I have a router that has bandwidth control and ip groups, this is very usefull for me. From the router i take the Internet service to a port on my Sophos Firewall (its a dell optiplex server with 3 lan ports). This PORT 1, works on the…
Hi, good day to everybody.
I need some help to fix this problem: i have a router that bring internet and network service to my sophos firewall xg, this firewall has DHCP relay to the main router. The router has bandwidht manager and load balancing…
Hi,
my firewall is setup in route mode. By default, it bridges the LAN port and all spare ports into an interface calls br0. I can not delete this interface since I won't be able to access it anymore.
I am trying to set VLAN on Port1 and it won't…
Hello Everyone,
I struggle to configure a Sophos XG (XG85W) with a PPPOE connection. (sophos XG85W is already used with the old copper connection and registered).
I received a Zyxel (Zyxel FMG3025) with the new fiber connection.
PPPOE connection…
New to XG Firewall, and trying to resolve an issue.
Another Tech setup this XG135 Firewall, and configured a Bridge Interface for ports 1 and 3-8. Routing is enabled on the Bridge.
We are seeing issues with LAN to LAN communication. The Firewall is…
Hello all,
I have an Eero Pro mesh wifi system at home. I want to add an additional layer of protection and I have Sophos running in an ESXi VM on an appliance and would like to set that up in bridge mode. It is currently not deployed in bridge mode…