Hi,
I thought creating a Bridge on XGS-136, for example, creates a "switch" between bridged ports, but either I do not understand principle, or reality does not follow the principle - I found no, bridged ports do not behave like switched ports.
For…
Firewall newbee here.
I currently have XG ver 19 configured in bridge mode and working for the most part with the Fios router. All wired traffic is working correctly, However the Wifi connections to the Fios router are not being forwarded or Routed…
Have a 3rd party hardware running XG 19 on. It has 6 ports, using one for WAN and the rest (5) are set in a bridged LAN mode following the directions here: https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp…
hi,
i'm running a XG210 (SFOS 18.5.3 MR-3-Build408) and have it set-up with a bridge pair BR0 for the primary LAN using Port1 and Port4 as physical members. Both are set as LAN-interfaces.
everyting is connected to Port1, port 4 i only use to connect…
Hey guys,
Since Monday morning (7:26 AM), Xfinity was "doing some work to upgrade your services" in my apartment complex. I have two XG home editions, running on different hardware, that are able to initially connect once putting the Xfinity gateway…
Hi all,
Am asking this question for the second time. I am new to Sophos and am finding it nagging that I can't get the basic functionality without doing a lot.
I am setting up a new firewall. By default, a bridge-pair (br0) was created, with Port…
Hello guys.
First of all I would like to thank you for taking the time to read my question.
I'm trying to understand the need for a NAT (MASQ) in bridge operating mode.
And one scenario, I have the need to leave Sophos Firewall (SF) in this mode…
I'm evaluating Sophos XG in a virtual environment with a bridged configuration, an interface br0, with one physical port attached to a router and the other attached to the core switch.
100% of the traffic between the router and switch is 802.1q-tagged…
Hallo Leute
Habe heute eine SG230 rev1 bekommen.
Installiert und auf wan (Port 1) ist mein Modem.
Und die OS hat eine Bridge von Port 0 . 2. 3. 4. und 5 gemacht.
Jetzt habe ich auf dem Port 5 mein Proxmox Server dran.
Nur komisch ist das ich…
hi community,
i have a vodafone station wlan router/ modem and want to setup a spare pc in order to run sophos xg home.
is there a possibility to run the sophos xg parallel (behind) the wlan router in order not to change the wlan router settings?…
Hi,
I have been struggling to get transparent birding to work with VLANS properly.
I have two ports bridged, one as LAN and one as WAN in bridge mode. VLAN 1, which is native seems to be working ok. I have another TAGGED vlan, vlan 3, which kind…
I'm running Peplink router with 2 POE APs, multiple SSIDs and Vlans.
Deployed Sophos XG in bridge mode between the Peplink router, and POE switch. WAN/LAN connections from the Sophos are both connected to trunk ports (any vlan).
My bridge interface…
For example, in the following configuration.
PortC and PortD can't be selected as the inbound interface of the SNAT rule. br0 can be selected, but that rule does not apply. If select Any, that rule will be applied.
Long story short, I was attempting to enable a separate access point to our office XG Firewall, and I changed one of the port interfaces by adding WAN as an option. After doing this, i cant reconnect to the web admin portal via HTTPS and revert the setting…
I have a Draytek router in bridge mode connecting to a xg106 firewall. The router is set to 192.168.0.1 and the XG 106 is configured to 192.168.1.254.
I need a rule to allow me to navigate from the LAN to the bridged router. Can anyone help.
Hello,
DHCP request packets doesn't seem to be transmited throught bridge interface. I created a bridge with 2 ports : 1 classic physical port and 1 VLAN port on an interface.
DHCP server is in the LAN connected to the classic physical port (on this…
Hello All,
Since upgrading from 18.0.6 MR6 to 18.5.2 MR2 the Wi-Fi SSID associated with the LAN zone via a bridge has stopped working.
I have attempted to create a new bridge however it's not possible to adjust the members of the old bridge, the gui…
Hi,
an example of my setup:
LAN1 (192.168.1.254/24)<<PC1
Lan_Bridge ↴ 192.168.1.253
LAN2 (Lan_Bridge)PC2
LAN3 (Lan_Bridge)PC3
LAN4 (Lan_Bridge)PC4
LAN5 (Lan_Bridge)PC5
Now only LAN1 Port can connect to the internet, what do I need…
.Ahoy!
I have a customer who has an XG230. Port 6 (Eth) and Port 7 (Fibre) are bridged. The fibre from the 'leased line' modem is connected to port 7. Another company in their building is connected to port 6. This allows both companies to share the…
Hallo,
One of our customers uses an XG firewall in bridge mode. Version 17.5 was updated to version 18.5.2 yesterday. The firewall can communicate with the internet without any problems. However, clients and servers behind the firewall can no longer…
Hey all, this is my first post
I think i am missing something and need a little guidance on how to enable access to the sophos gui on the lan side from my main PC within my current setup.
The setup (see pics)
Router -> Sophos XG -> Core Switch …
Hello everyone if you please help me about this issue i m trying to solve.
I installed vm XG Home Edition in Synology Nas but i cannot bridge the WAN with LAN. I want ISP Router to act as DHCP Server as it is, so my thought is to pass the traffic through…
Hi all
im searching a solution for this topic:
I have made a Zone (Serverzone) and i want it to be as VLAN in Port 3 but i also want it to be in the Port 2(not as VLAN, direct) i tried to made a bridge, but then the VLAN Port didn't work, so whats…
I am quite new to networking and learning new concepts and things every day, but I have no idea how to accomplish the following:
I have a modem from my ISP (ZYXEL VMG8825-T50), which connects to my old router (an Asus RT-3200), and now I also connected…