Hi everyone,
I have two IoT devices that need connected both wireless and wired on the same network.
Wireless and wired (connected to a dedicated port of the FW via a switch) clients must have the same IP adress range (so the same DHCP).
How I could…
Dear Team
I Use Sophos Xg firewall and integrate it with radius server in order to use it for Wifi Authentication with protocol 802.1x for dynamic VLAN assigned and it working fine except that the users which connect to the wifi keep disconnecting every…
I added an APX120 to my small and very simple network, but it does not show on the pending list.
Here are the details:
Sophos XG115W SFOS 18.0.3 MR-2
APX120 running V2.3.1-5
I read the troubleshooting post and several similar threads.
APX120…
Hi everybody ,
i have a BUG ? when a configuration sent to AP, just after it donw and up my port 1... My port1 has just my vlan for Data/VOIP/Supervision..... the user was connected by IPsec site to site and they lost their connection after that.…
Hallo!
Ich hatte bei 2 APX 120 (kein Controller Connect) versucht, diese auf Werkseinstellungen zurückzusetzen.
Das Ergebnis war, das beide Access - Points keine Funktion mehr haben. Nach Anlegen der 12v bzw. POE leuchtet sofort die Status - LED…
Our VIP user with an XG85 home router wants to add the Google Nest Wifi mesh for better wifi coverage. I have searched quite a bit here and on Google but cannot find a clear example of how to allow both to co-exist.
Has anyone done this with an XG?…
Dearest Sophos community and crew,
In my spare time I am an IT manager for a small business.
We have recently purchased and now run a XG-115w.
Unfortunately I can't often be onsite. So when I am, I want to be ready to quickly implement a fix…
Hi, I know this topic was discussed several times but I didn't found a solution in the forum yet.
I use a XG106 (SFOS 18.0.1 MR-1-Build396) and several AP100c and APX320 access points. LAN has a different IP range than two of the WLANs have. This is…
Dear Team
I am trying to configure dynamic VLAN using radius server with Sophos XG and Sophos access point and it works fine except for the VLAN id for each user
I am passing the Tunnel-Private-Group-ID attribute from the radius through the firewall…
I am having an issue where all clients pc, tables, and phones can see the wireless no problems. But all my printers never see the wireless can't figure out why, is there something that needs to be done for printers to be able to see the wireless.
Hello i just purchased this firewall and have the following setup
I have 3 dhcp scopes:
VLAN_500_SCOPE - 192.168.10.100 - 192.168.10.200
VLAN_600_SCOPE - 192.168.20.100 - 192.168.20.200
WFIF_SCOPE - 192.168.30.100 - 192.168.30.200
…
i am a home license user, and i am looking to replace the AP i use currently as it is a old Cisco device.
Can i manage and configure an APX 320 device thru XG on MR2 code?
i see a few on Ebay and Amazon with the POE for ~$400..
Hello togehter, i've a Wireless-LAN-Controller and NFGW Firewall in progrss from another vendor. Now, the XG home Premium sounds good, but there are to many questionmarks in my case :( Current Mode 5 CAPWAP AP's from another Vendor (all are in CAPWAP…
Hello,
I'm facing issue with Sophos AP15 on Sophos XG210, I've 50Mbps speed on the VDSL line.
I got the full speed when I connect via cable from the firewall but when I connect to wireless network with a bridge to AP LAN or separate zone I got max…
Hi,
we have a WiFi running for our smartphones mainly to update Android and apps. WiFi is offered through an AP55. Only smartphones can connect based on their MAC address. There is an own firewall rule for these connections with the following options…
Hi,
I managed to get two WLAN networks working on the Sophos XG using our existing Unify AP's.
Port4, zone wifi, static gateway address in the LAN range, LAN Relay
Port4.120 WifiGuest, DHCP server with IP address 192.168.120.x
Port4.121 Wifi,…
Hi All,
I'm new is Sophos community, first I want to thanks Sophos for releasing the Home Edition of XG Firewall, very important to have a safe network at home, I have researched for best hardware for Sophos XG and after a while checking and knowing…
Hi,
right now I do have an AP15 and AP55 at home.
Setup: In the upper floor I installed the AP55 and downstairs the AP15.
I make use of 7 different SSIDs and only two of them are also broadcasted by the AP 15 (yes, I enabled "Fast Transition…
Hallo ,
Ich habe folgendes Problem wo ich gerade verzweifel:
Wir setzen Macmon als automated NAC ein. Wir haben derzeit eine UTM 450 mit 22 angeschlossenen RED15W Filialen.
Nun soll die Sophos mit den RED15W und AP55 Wlan bereitstellen, die NAC…
Hi all,
We use Sophos firewall SG210 on XG platform and heartbeat enabled with firmware 17.0.3 MR-3 and existing firewall rules includes if user laptops don't have have green heartbeat, they cannot access servers on premises such as active directory…
Hi, good day.
I have a router that has bandwidth control and ip groups, this is very usefull for me. From the router i take the Internet service to a port on my Sophos Firewall (its a dell optiplex server with 3 lan ports). This PORT 1, works on the…
Using the XG Firewall Basic Guest Access Hotspot Password of the Day Feature, On the guess access login page
it Says
Password of the day ___________
Sophos Firewall
For Administrationve questions please contact SomeUser@SomePlace.Com
That…
Hi,
I have the following setup:
Sophos XG 85 Firewall (Wifi)
DMZ Zone (VLAN 2 on Port 1)(10.0.1.0/24)
Wifi Zone (10.0.2.0/24)
I have the following devices:
Raspberry Pi as Home Assistant Host (Smart Home) in the DMZ zone
Xiaomi Smart…