I am having issue on 18.5 MR1 with AP15. Wi-FI goes down and only reboot is the way to get wireless lan again. Looking at the wc_remote.log, here what happens when the wi-fi stacks: 30>Jan 21 08:58:56 A4004F40C263B03 hostapd: wlan0: STA a0:d0:dc:2c…

Hello everyone, after restarting the two APX 120 that we are using, a network loop is caused. If I disconnect the AP´s from the network, everything works fine again. I have replaced all cables and used different ports. They are directly connected to…

I have been handed a task to add a Ubiquiti Nano AP to an existing XG125w network to extend range for an office that's too far away from the XG to get good service. DHCP is provided by Domain controller on the network Goal is for the Unifi AP to be…

Hello, I have a problem and I have no idea where to look, maybe someone can give me a tip. I have an XG115 to which an APX120 is connected. The AP is a member of a MESH and serves as a root AP (5 Ghz). The AP also broadcasts the client SSIDs in 2.4 Ghz…

Hello, AP Firmware 11.0.016 is now available. Where are the release note, please ?

Hi I am using sophos xg v18 utm We have multiple access points in our network. We have applied WPA-psk security on the same.The problem is that the key gets leak to all employees very easily and they connect their personal devices snd use internet…

We have a new office with an XGS 2100 which is connected to our central UTM SG via RED. We have created a bridge on both sides for the office LAN and multiple WiFi networks. All traffic is routed via the central UTM. (UTM is default gateway) Our WiFi…

Hey guys. I would love to get your opinion and help on this. I have XG135W and four APX120. With machines connected directly via ethernet has no speed issues. However any wifi devices are experiencing 1/4 of the speed. As a test, I connected google…

I have connected my APX120 to the XG and created a new wireless network, basically same as the default sophos. Bridge to AP LAN. Now I want to add another network with its own subnet, that will have access to my LAN on Port3. So I created a vlan connected…

Hi, I'm sharing fiberglass internet (bit expensive) with my neighbours, and we have installed XG home in a PC. We have created username and password for each user and installed quit a few access points and some routers to the network. But now we have…

i am a home license user, and i am looking to replace the AP i use currently as it is a old Cisco device. Can i manage and configure an APX 320 device thru XG on MR2 code? i see a few on Ebay and Amazon with the POE for ~$400..

Using the XG Firewall Basic Guest Access Hotspot Password of the Day Feature, On the guess access login page it Says Password of the day ___________ Sophos Firewall For Administrationve questions please contact SomeUser@SomePlace.Com That…

Hello all, I've been experiencing some issues lately with APs configured as 'Bridge to LAN'. First time, I saw the APs as 'Inactive' on the firewall, since we were implementing POL on our network infrastructure I thought this was due to the dBs on…

Hi all, I am going to be deploying some AC55C's and need some guidance on what is the best method to achieve what I am after. I have a hub and spoke network connected with 5 different sites connected via Metro-Ethernet links, and an XG210 at the main…