Buenas,
necesito ayuda, porque no consigo por mis medios..
La SubredLocal la llamaremos Subred1
Tengo un Sophos XG, que esta conectado a otro host a través de una IPsec "Interfaz de Tunel", la llamaremos Subred2.
Luego tengo usuarios que se conectan…
Greetings,
We've set up a Site to Site VPN in our Main and branch office, they were active but we're still unable to ping the ip address from the main. Can anybody help me with this?? or any configurations i need to check please? thank you.
The information provided by clients is as below
From our admin side, we already amended the information such as local subnet and remote subnet as below except the interface wan1
Do we need to match the interface also? We do not know how…
Hello everyone,
I have successfully established an IPSec site-to-site connection between a SOPHOS XGS firewall and a RUT240 from Teltonika.
A ping from the Teltonika router to the SOPHOS firewall works. A ping to an end device behind the SOPHOS firewall…
I'm having issue with my IPSEC-site-to-site connection. The IPSEC vpn cannot be established. Im having error " unable to resolve %any, retrying in 60s" when checking the strongswan.log
Here is the full logs:
loading secrets from '/_conf/ipsec/ipsec…
I have setup IP-Sec between head office and branch office few days back. My branch office is working perfectly fine and accessing all the resources on the head office but on the other hand when i try to access or ping any resource on branch office from…
Hi All,
We have a question in Full tunnel site to site IPsec VPN. When we create a local 192.168.183.50/32 to remote Any site to site IPsec VPN.
We found that XG's own routing will also be carried out through this VPN tunnel.
There…
Hello,
I have 2 branch offices that are connected to the head office via VPN
, now I want to connect these 2 offices to each other using the head office as a forward node, is that possible? if so please explain how
PS: The branch offices don't have…
I am using XGS136 Firewall, Recently I restored a backup to XGS136 from XG 126. Now I fell to an issue that my ipsec site-to-site connectivity does not work properly, though the connectivity status is green. like site A user access site B, but site B…
Hello, I would like ask , if somebody know , if will be option monitor VPN IPsec via snmp or API. I found , that is offen question in the forum.
Sophos XG - SNMP - Monitor tunnel status
Check Ipsec Vpn Status by Command Cli
Read IPSec Connection…
Help me create an IPSEC failover for a headquarters and branch office with 2 gateways each. I would like to create a high availability scenario, as the links in both locations fluctuate a lot.
I thought about doing it like this:
The Branch initiates…
We will have a special deployment at one customer soon.
The customer has serveral branch offices where Sophos XGS 136 will be the local gateway for 5-6 subnets for each branch office. The BO firewalls will only have base subscriptions and only some…
Dear Community,
we have a customer with a XG Firewall in HQ and OPNSense in BA. Them are connected with IPSec PB S2S VPN. There is a older solved Case for more informations:
https://community.sophos.com/sophos-xg-firewall/f/discussions/141557/need…
Good day together
I normally look after Zyxel firewalls, but I was now allowed to take over a Sophos customer from a former colleague. I would like to switch this customer from IKEv1 to IKEv2, but I don't want to make a hard switch. So that the customer…
Hi everyone,
we have an existing VPN Connection:
local subnet:
172.25.169.144/28
remote subnet:
172.25.169.104/29
no we have to translate every connection with destination 172.25.169.108 to our source ip 172.25.169.145.
i already tried…
The IPSec tunnel comes up and is seen on both ends but not able to route traffic between the two. Tried to setup static routes, no change. What do I need to set on both ends to get the traffic to flow ??
Good Day,
We have four site-to-site VPNs setup and working.
Site A (Head Office)
Site B (Branch Office 1)
Site C (Branch office 2)
Site D (External party (Fortinet) site)
Site A (Head Office) connects to Site D (external party) to allows…
IPSec Site-2-Site VPN
from initiator XGS to receiver SG firewall.
the XGS is on v19.5.3
IKEv1 (caused by SG capabilities)
Whenever someone rebooted the ISP router on the XGS site, the XGS will not re-initiate the connection and sits there disconnected…
Hi,
First of all, I tried to find existing discussions about the issue i'm facing but i'm not 100% sure I've searched/used the right keywords.
Let me explain:
I have 3 sites (let's call those SS, RR and DC).
SS subnet is: 172.42.23.0/24
RR s…
Figured as since I cannot find anyone else experiencing this issue, wanted to highlight this here if it helps someone else or if Sophos want to investigate themselves. FW type, config and version in subject. TLDR: Disable HA if you experience issues with…
Dear Support, we set up a Fortigate firewall 200F at our edge and replaced the Sophos XG 210 we previously used. However, I have a remote site connected via RED devices, I decided to just continue using the RED device and move the Sophos XG behind the…
Hello, I have two sophos: - XGS107 as branchOffice (19.5.3) - XG330 as HeadOffice (19.5.2) I am experiencing strange behavior on "route-base" ipsec tunnel. Tunnel status on both sites is down but on HeadOffice i can see that connectio is UP.
HeadOffice…
Hello everyone, I have an IPsec connection to our holding with NAT, the fake local network is provided to us by the holding and can only be one. The problem is that I also have to convey other secondary networks to the tunnel, so I was thinking of doing…
We have an XGS 2100 with an IKE2 IPSEC Site-to-Site connection to Azure.
When initiating the connection, the "Flat LAN" subnet mounts but the various VLAN's bound to the "flat LAN" don't come up.
The VLAN's are used for SIP phones and WiFi access…
I spent some time on research here and I wasn't able to find something like How-To, KB artice covering this scenario where we may have Sophos LTE modem on branch office or Teltonika modem attached to port.
We do local break out for internet services…