Hello, I have a problem with the backup link in Sophos. We received an LTE link that works and has the correct address set. The "Type" options were set to "Backup" and the "Activate on failure of" rule was set to the main link. The problem is that when…

Added second WAN zone network port5 ipv4 192.168.101.2/27 gateway ip 192.168.101.1 SSID new network DHCP Firewall Rule WAN link manager information able to connect Tablet to Wifi and i get DCHP release result block firewall…

I have three WAN, each line 20Mb, I need to merge to get total speed 60Mb not load balancing to found in final in speed test give me 60Mb

On top of it showing the WAN as down, its always showing 25% packet loss. WHereas if I connect my laptop directly to the ISP router, the is no packet drop.

Hi, I need a little help. I have client that has three WAN connection. One set to Active and two Backups. How can I choose which backup connection will take over first, if the Active one, fails? I have this option: but it let me choose only between…

I often receive the following error when trying to update a failover rule for one of my gateways: "Gateway failover rule could not be updated" I can't find any consistency in how to re-create this. I'm not sure if the problem also existed in v18.x…

Dear All, i have configured two isp as below snapshot is it corect or we need to configured sdwan policy for redudancy please suggest.

hello, I have one ISP I am using which is a dedicated 30/30mbps but the speed connection is really poor so I just want to use another ISP which will give me a 10/10 dedicated internet connection. So what I want to ask is that can I merge both the ISP…

The failover rule for a WAN link only allows for failover to "any available gateway." What if I want it to fail to a specific gateway, one that is active all the time? I have 3 WAN connections--these are ALL active connections ALL the time. Fios 1000…

I have Ports 2 and Port 4 configured as WAN, both active with weighting of 1. Both are connected to Comcast BUT separate internet connections, one is from my house, one from next door. It appears by Speed Testing that both are passing download traffic…

Greeting SOPHOS Comunity, I am looking for some help configuring routing on a Sophos XG 135 SFOS 19.0.0 GA-Build317. I don’t work on firewalls often, so I apologize if some terms are incorrect. I did find https://community.sophos.com/utm-firewall…

Hello, I'm experiencing sudden break ups witht he connection with my XG135w. The configuration is as follows: ISP model with optical connection - unmanaged switch (with nothing else connected except ISP modem and XG) - XG - couple of switches with…

One of Our customers using Sophos XG 230 V 19.0.0 firewall and configured 03 WAN links (One for backup and Two for Active-Active Load Balancing) but after the configuration one of the Active-active links went frequently and sometimes it always indicated…

Hi I've not long ago upgraded the firewall to V19 in anticipation of the new SD-WAN profile settings that will hopefully manage our internet connections a bit more reliably. Up until now I've had them set up as failover in thte WAN link manager to…

Hello, I have 2 WAN port as long both are working everthing is ok. But as soon my 2. Fritzbox is dead (Cable Fritzbox fails like once a year, but thats another story) there is no regular outgoing network anymore. In WAN Manager both are ok, in the…

Hi everyone, I've just read some threads about similar problem without luck. My XG is configured with a primary wan as active and a second line as backup. I've configured a couple of SD-WAN rules to redir always on the second wan the traffic for some…

There was a previous thread around a year ago where Casey Luchsinger was having issues getting a Starlink device working on an XG. The thread showed no resolution. One of our customers has ordered a Starlink service (to our surprise). Has anyone successfully…

Hi, I have a scenario, where my ISP gives us 02 interfaces being primary (WAN1) and secondary (wan2). Above these WANs it routes some ips to them, so in case the primary fails, the secondary continues to serve these ips. That way, I can put a certain…

Hello, I recently installed a second WAN link on an XG, I would like to know if I am doing the right thing: I have one LAN port (Port 1), one WAN port (Port2), one WAN port (Port3). WAN Port 3 is new. In the Wan link manager tab, both…

Hello, i have a simple problem. There is a Sophos XG Firewall with two WAN Interfaces. One of them is the main WAN Interface with a Cable. The second one is a backup WAN interface with a mobile backup router. Now there is a problem, that i cannot monitor…

I have setup: Port2 WAN Static, set Active in my failover rule in Link Manager. Port8 WAN Failover DHCP (its a 4G cradlepoint) set as Backup in Link Manager. I set the backup to activate on Any gateway fails. Test worked perfect right on time (30sec…

As I am new to Sophos UTM this might be a silly question, but need suggestions. We have XG136 with one WAN port is connected to Broadband (internet) and other WAN port is connected to MPLS line which is used only for suzuki datacenter (ex). The scenario…