Good day I have a Sophos firewall XG 310 V 19.01, The firewall is at the HQ, and there are MPLS sites connecting to the head office. we are using Microsoft 365 The problem is, we are failing to open Sharepoint and Onedrive from the MPLS sites. But…

On Sophos XG 19.01 MR1 Virtual appliance, i have for several minutes that any new TCP session outbound to the web is not connecting. while inspecting a tcpdump file, i see that existing TCP sessions work normally, just any new TCP SYN is not getting…

I'm trying to copy a PXE Boot Optin from the DHCP Server of a UTM to Sophos XGS The problem I face is, the Boot Client uses the IP-Address of the Firewall/DHCP Server as TFTP Server instead of the value provided in the Option 66 (Next Server) I tried…

Hello I have SOPHOS XG 19.0.1 firmware which i have upgraded version due to facing issue, one web which was working earlier suddenly stop to work and not getting access from the public network. I took support from tech, but they also not able to understand…

Is it possible to display only those firewall rules that have this setting for user/group "Any"? I could not find a filter that worked. we're on SFOS 19.0.1

Hi We have a fibre link from our ISP with a static IP and a secondary / extra range of public IPs. Public IP: 100.100.100.62 (numbers made up) with GW 100.100.100.61 - This is the primary IP we use. We also have a set of secondary public IPs on…

Hello Everybody I have a new problem with my installed Sophos Firewall Firewall XG115 (SFOS 19.0.1 MR-1-Build365) LAN Subnet:192.168.200.0 Mask:255.255.255.0 GW:192.168.200.1 VLAN 10.20.1.0 Mask:255.255.255.0 GW:10.20.1.1 To be able to configure…

Hello, I've been detecting a strange behavior on an xgs 2300 (SFOS 19.0.1 MR-1-Build365) for a few days. At first the connections of some PCs to an IP seem to work but then I start to log a series of errors such as "Invalid traffic" (I attach a screenshot…

XG86 Firewall v19.0MR1 TLDR: When i enable SD-Wan for a certain zone to use differente Gateway all other rules on that zone is ignored I have 2 Zone and 2 Wan. First LAN zone use ISP1 and ISP2 as a backup For the Second Zone i need ISP2 default and ISP1…

XGS2300 (SFOS 19.0.1 MR-1-Build365) We are experiencing high latency in connections on our internal network in the sip protocol, reaching over 100ms> in local network , we reviewed the entire structure, installed a new center and the latency continues…

Hi there, can someone please tell me where I can find the equivalent of Zyxel's Policy Route

Hi guys.. I'm with problems to propagate networks through BGP with Azure ExpressRoute The connection is established, but I keep receiving these BFD logs from Azure: There is any command to solve this? The firewall is on version SFOS…

I have the XGS 136 firewall, SFOS 19.0.1 MR-1-Build365 , I have a problem connecting the local network to the DMZ . Users get invalid traffic. and the server ( Odoo ) stops responding , and this issue happened more with users who have Laptop HP -15- DY…

Hello, I have this network architecture , And my goal is that the VLAN100 (with Network IP : 192.168.123.0/24) to have access on my Server 172.20.24.24 So , I create this Route on my Sophos Firewall ( version XG S3300 firmeware 19.0…

This is on the XG106w (SFOS 19.0.1 MR-1-Build365) I have a client that has a Pix-Star digital photo frame that can't see the internet when connected to WiFi. I knew something was blocking it but didn't know what, so I had created a bypass rule for the…

Hi There, I’m new in the Sophos world and I have some trouble configuring 1to1 NAT. My case: XG115 Firewall (XG115 (SFOS 19.0.1 MR-1-Build365), 1 Server in the LAN (no DMZ), 1 public address for this Server. I want to access my Server from Internet…

Hi, I have configured DNAT rules to our internal web server according to the documentation https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp/RulesAndPolicies/NATRules/RulesPoliciesCreateDNATAndFirewallRulesForInternalServers…

Hey there, My DHCP IP address from my carrier is 203.xx.xx.xx/16 but the gateway is in a different subnet 100.xx.xx.01.. wacky system, but not one I was really expecting.. The issue I'm running in to is that I'm trying to establish a backup IPSec…

Dear Friends, We have recently upgrade our Firewall XG310 to latest Firmware ( SFOS 19.0.1 MR-1-Build365) , now we are facing issue in IPS Time of signature update which shows 23:08:29, Nov 11 2022 and the Pattern Updates for IPS and Application signatures…

Hello, I am trying to set up IMAPs/POPs/SMTPs Settings in an XGS running SFOS 19.0.1 In general there is an external Mail Server and in the local network behind the XGS there are Outlook Clients that connect to the Mailserver via IMAP 993 and SMTP…

My setup has 2 VLANs - Main and IoT, using Sophos XG as DHCP and gateway. I'm able to allow traffic between the 2 VLANs by adding a firewall rule of LAN Any host Any service to LAN Any host Any service. What I'm trying to do is to only allow traffic…

Hi, I have increased the size of a subnet from /27 to /26 and any node with an IP beyond the range of /27 has connectivity issues. I have done this before and don't remember having issues. Apart from Network > Interfaces > VLAN > {Port} > IPv4/netmask…

Good morning everyone, I configured the BGP over RBVPN between our office and the 2 connectivity present at one of our customers (fiber and radio link), the connection is made via the prepend AS also tried with LOCAL PREF AND MED, if I try to switch off…

Hi Sophos Community, I was wondering for a while why some of our customers couldn't reach the Lastpass website. Now I have discovered that its being blocked by application filtering with filter "Block high risk (Risk Level 4 and 5) apps". I am aware…

Hi. I'm running SFOS 19.0.1 and are currently migrating my mail. We have our own antispam (Xeams) placed in our DMZ and have no subscription for Sophos antispam solution. I really need some guidance on howto make Sophos work with an existing antispam…